Tooth Chenille Yarn Applique Design Machine Embroidery Seven Sizes 4x4, 5x5, 6x6, 7x7, 8x8, 9x9, 10x10 Hoop

The perfect tooth chenille yarn applique embroidery design with lots of sizes!! It has a narrow zigzag stitch, which makes applying the yarn a bit easier. PLEASE NOTE: you can add fabric to this design as shown in the picture, but you will have to back up the steps and repeat the final step twice to do so.

This listing includes seven sizes:
4x4 - 3 5/16 x 3 7/16 inches with 594 stitches
5x5 - 4 3/8 x 4 15/16 inches with 746 stitches
6x6 - 5 7/8 x 5 3/16 inches with 881 stitches
7x7 - 6 1/16 x 6 7/8 inches with 1,022 stitches
8x8 - 6 7/8 x 7 7/8 inches with 1,165 stitches
9x9 - 9 1/16 x 7 15/16 inches with 1,340 stitches
10x10 - 10 3/16 x 8 15/16 inches with 1,504 stitches

This is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.

Available in PES, DST, EXP, HUS, JEF, VP3, and XXX.

This design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.


This is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.

Where hoop sizes are mentioned, I am referring to the following hoop sizes:
Hat (60mm x 130mm)

4x4 (100mm x 100mm)

5x7 (130mm x 180mm)

6x10 (160mm x 260mm)

8x8 (200mm x 200mm)

7x12 (180mm x 300mm)

8x12 (200mm x 300mm)

9.5x14 (240mm x 360mm)

10.5x16 (272mmx460mm)


Chenille Yarn Instructions:

Do not change the colors of the two steps to the same color. They must be two different colors when you send the design to your machine so that the machine will stop in between the two steps.

Hoop your project and send the design to the machine. Run the first step, which shows the placement for the yarn.

Remove your hoop from the machine, but DO NOT unhoop your project. Use temporary adhesive spray to spray along the stitches. I only recommend 505 by Odif or KK100 by Gunold to use for embroidery, as they do not gum up your needle or machine. Some people use double-sided tape over the stitches to hold the yarn in place. I have not tried this method.

Place the yarn over the placement stitches, being careful to follow the stitches exactly. Gently press down to make sure the yarn will not move during embroidery.

Place the hoop back on the machine and run the final step, which is the narrow zigzag stitch to appliqué the yarn to the project. Once completed, remove the hoop and unhoop your project. Rub your fingers over the yarn to fluff the fibers over the stitches.

Happy Stitching!