Tigers Puff 3D Foam Satin Outline Embroidery Design Six Sizes 5x7, 8x8, 9x9, 6x10, 7x12, and 8x12 Hoop

This is such a Tigers puff 3D foam embroidery design! Made with the addition of embroidery foam, it has a 3D look which makes it pop!  Please note: only the center word is digitized for 3D foam.  The border stitch is just a satin stitch border, NOT INTENDED for foam.

Available in six sizes to fit:

5x7 Hoop - 4 3/8 x 7 1/16 inches with 19,046 stitches
8x8 Hoop - 4 7/8 x 7 7/8 inches with 21,083 stitches
9x9 Hoop - 5 13/16 x 9 3/8 inches with 24,956 stitches
6x10 Hoop - 6 5/16 x 10 3/16 inches with 27,106 stitches
7x12 Hoop - 7 1/16 x 11 7/16 inches with 30,147 stitches
8x12 Hoop - 7 1/4 x 11 3/4 inches with 31,011 stitches

This is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.

Available in PES, DST, EXP, HUS, JEF, VP3, and XXX.

This design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.


This is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.

Where hoop sizes are mentioned, I am referring to the following hoop sizes:
Hat (60mm x 130mm)

4x4 (100mm x 100mm)

5x7 (130mm x 180mm)

6x10 (160mm x 260mm)

8x8 (200mm x 200mm)

7x12 (180mm x 300mm)

8x12 (200mm x 300mm)

9.5x14 (240mm x 360mm)

10.5x16 (272mmx460mm)

Instructions:
You should run a trace on the machine to see exactly where the design will stitch before starting to sew. Lay down foam to cover the area of the design before starting the machine.  Select a foam close in color to the thread you are using for the design.  Start the machine, holding the foam in place until enough is stitched down to keep it from shifting.  Tear away the excess foam before stitching the outline. Once completed, steam (being careful to not touch the hot iron to the thread) or heat the foam using a heat gun to cause the foam to shrink slightly, which creates a cleaner look. Enjoy!

Happy Stitching!