MUMMY Tall Embroidery Design Mother's Day Gift Six Sizes and Seven Est Years 2020-2026 0-9 Included Six Sizes 7, 8, 9, 10, 11, and 12 Inch

Treat yourself or your MUMMY to this really cute embroidery design with an established date which can be changed to any year! Seven years include, but numbers 0-9 are also included which enables you to create any year.  The established years are separate, so if you want to add it to your design, you will have to merge the Mummy file and the established year of choice together.

This listing comes with six sizes, which only includes the MUMMY design, since the established years can be added or not and the overall size will depend on your spacing:
7 inches wide: 2 15/16 x 7 1/16 inches with 9,973 stitches
8 inches wide: 3 1/4 x 7 7/8 inches with 11,428 stitches
9 inches wide: 3 11/16 x 8 7/8 inches with 13,612 stitches
10 inches wide: 4 1/16 x 9 7/8 inches with 18,526 stitches
11 inches wide: 4 1/2 x 10 13/16 inches with 20,612 stitches
12 inches wide: 4 7/8 x 11 3/4 inches with 22,781 stitches

This is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.

Available in PES, DST, EXP, HUS, JEF, VP3, and XXX.

This design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.



This is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.

Where hoop sizes are mentioned, I am referring to the following hoop sizes:
Hat (60mm x 130mm)
4x4 (100mm x 100mm)
5x7 (130mm x 180mm)
6x10 (160mm x 260mm)
8x8 (200mm x 200mm)
7x12 (180mm x 300mm)
8x12 (200mm x 300mm)
9.5x14 (240mm x 360mm)
10.5x16 (272mmx460mm)

APPLIQUÉ INSTRUCTIONS:

Fabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.

Appliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.

Step 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.

Step 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.

Step 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.

For designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.

Happy Stitching!