Four Leaf Clover Applique Embroidery Design Four stitches Raggy, Satin, ZigZag St. Patrick's Day St. Paddy Three Sizes 5x7, 6x10, and 8x12 Hoops

Are you feeling LUCKY? You'll definitely want to add this four leaf clover applique design to your embroidery collection. It comes in four sizes, each with three different edge stitch options, for a total of 12 designs. Choose from satin edge stitch, zigzag edge stitch, or raggy (bean) edge stitch.

You are purchasing an embroidery design which must be stitched using an embroidery machine. This is not a patch!

Available in four sizes to fit:

Raggy:

4x4 hoop - 3 5/8 x 3 7/8 inches with 846 Stitches

5x7 hoop - 4 11/16 x 5 inches with 1,270 Stitches

6x10 hoop - 5 3/4 x 6 1/8 inches with 1,309 Stitches

8x12 hoop - 7 1/4 x 7 11/16 inches with 1,926 Stitches

Satin:

4x4 hoop - 3 11/16 x 3 15/16 inches with 3,686 Stitches

5x7 hoop - 5 1/8 x 4 3/16 inches with 4,695 Stitches

6x10 hoop - 5 5/16 x 6 5/16 inches with 5,753 Stitches

8x12 hoop - 7 3/8 x 7 7/8 inches with 1,926 Stitches

ZigZag:

4x4 hoop - 3 11/16 x 3 15/16 inches with 1,291 Stitches

5x7 hoop - 4 13/16 x 5 1/16 inches with 1,659 Stitches

6x10 hoop - 5 7/8 x 6 1/4 inches with 2,019 Stitches

8x12 hoop - 7 7/8 x 7 7/16 inches with 2,516 Stitches

This is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.

Available in PES, DST, EXP, HUS, JEF, VP3, and XXX.

This design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.



This is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.

Where hoop sizes are mentioned, I am referring to the following hoop sizes:
Hat (60mm x 130mm)

4x4 (100mm x 100mm)

5x7 (130mm x 180mm)

6x10 (160mm x 260mm)

8x8 (200mm x 200mm)

7x12 (180mm x 300mm)

8x12 (200mm x 300mm)

9.5x14 (240mm x 360mm)

10.5x16 (272mmx460mm)

APPLIQUÉ INSTRUCTIONS:

Fabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.

Appliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.

Step 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.

Step 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.

Step 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.

For designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.

Happy Stitching!