Christmas Tree Chenille Yarn Applique Machine Embroidery Design Five Sizes 6x6, 7x7, 8x8, 9x9, and 10x10 Hoop

Who's ready for Christmas? This swirly Christmas tree chenille yarn applique embroidery design will get you in the spirit!

This listing includes five sizes:
6x6 hoop - 5 7/8 x 4 1/8 inches with 877 stitches
7x7 hoop - 6 7/8 x 4 13/16 inches with 1,014 stitches
8x8 hoop - 7 13/16 x 5 7/16 inches with 1,144 stitches
9x9 hoop - 8 7/8 x 6 3/16 inches with 1,291 stitches
10x10 hoop - 9 13/16 x 6 7/8 inches with 1,431 stitches

This is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.

Available in PES, DST, EXP, HUS, JEF, VP3, and XXX.

This design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.


This is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.

Where hoop sizes are mentioned, I am referring to the following hoop sizes:
Hat (60mm x 130mm)

4x4 (100mm x 100mm)

5x7 (130mm x 180mm)

6x10 (160mm x 260mm)

8x8 (200mm x 200mm)

7x12 (180mm x 300mm)

8x12 (200mm x 300mm)

9.5x14 (240mm x 360mm)

10.5x16 (272mmx460mm)


Chenille Yarn Instructions:

Do not change the colors of the two steps to the same color. They must be two different colors when you send the design to your machine so that the machine will stop in between the two steps.

Hoop your project and send the design to the machine. Run the first step, which shows the placement for the yarn.

Remove your hoop from the machine, but DO NOT unhook your project. Use temporary adhesive spray to spray along the stitches. I only recommend 505 by Odif or KK100 by Gunold to use for embroidery, as they do not gum up your needle or machine. I have also had success using plain white Elmer's glue over the stitches. Some people use double-sided tape over the stitches to hold the yarn in place. I have not tried this method.

Place the yarn over the placement stitches, being careful to follow the stitches exactly. Gently press down to make sure the yarn will not move during embroidery.

Place the hoop back on the machine and run the final step, which is the narrow zigzag stitch to appliqué the yarn to the project. Once completed, remove the hoop and unhoop your project. Rub your fingers over the yarn to fluff the fibers over the stitches.

Happy Stitching!