{"title":"Applique","description":"","products":[{"product_id":"mama-applique-embroidery-design-zigzag-two-layer-mothers-day-four-sizes-5x7-6x10-8x8-and-8x12-hoop","title":"MAMA Applique Embroidery Design Zigzag Two Layer Mother's Day Four Sizes 5x7, 6x10, 8x8, and 8x12 Hoop","description":"\u003cp\u003eTreat yourself or your mama to this really cute embroidery design!!\u003c\/p\u003e\n\u003cp\u003eAvailable in four sizes to fit:\u003cbr\u003e5x7 hoop - 3 7\/8 x 7 1\/16 inches with 5,692 Stitches\u003cbr\u003e8x8 hoop - 4 5\/16 x 7 7\/8 inches with 6,246 Stitches\u003cbr\u003e6x10 hoop - 5 9\/16 x 10 1\/8 inches with 7,902 Stitches\u003cbr\u003e8x12 hoop - 6 3\/8 x 11 5\/8 inches with 8,695 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616556323032,"sku":"10755","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/MAMATwoLayer.jpg?v=1671046288"},{"product_id":"parts-girl-block-zigzag-applique-embroidery-quick-stitch-shirt-design-two-sizes-6x10-and-8x12-hoop","title":"Parts Girl Block ZigZag Applique Embroidery Quick Stitch Shirt Design Two Sizes 6x10 and 8x12 Hoop","description":"\u003cp\u003eCute applique embroidery design for your favorite parts girl! It comes with a zigzag edge stitch for a quick stitch out.\u003c\/p\u003e\n\u003cp\u003eListing comes with two sizes to fit:\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 6 5\/16 x 9 1\/4 inches with 6,578 stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 7 3\/8 x 10 13\/16 inches with 7,572 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616557633752,"sku":"11027","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/PartGirl.jpg?v=1678384025"},{"product_id":"secretary-block-zigzag-applique-embroidery-quick-stitch-shirt-design-two-sizes-6x10-and-8x12-hoop","title":"Secretary Block ZigZag Applique Embroidery Quick Stitch Shirt Design Two Sizes 6x10 and 8x12 Hoop","description":"\u003cp\u003eCute applique embroidery design for your favorite secretary! It comes with a zigzag edge stitch for a quick stitch out.\u003c\/p\u003e\n\u003cp\u003eListing comes with two sizes to fit:\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 3 11\/16 x 10 3\/16 inches with 7,219 Stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 4 1\/4 x 11 11\/16 inches with 7,932 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616557666520,"sku":"11151","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/Secretary.jpg?v=1677084234"},{"product_id":"mom-split-applique-embroidery-design-diamond-stitch-mothers-day-thanksgiving-gift-two-sizes-6x10-and-8x12-hoop","title":"MOM Split Applique Embroidery Design Diamond Stitch Mother's Day Thanksgiving Gift Six Sizes 4x4, 5x7, 5x12, 8x8, 6x10, and 8x12 Hoop","description":"\u003cp\u003eTreat yourself or your MOM to this really cute applique embroidery design with a split area to add kids names, or last name, or words to describe your mom!! THIS DESIGN DOES NOT COME WITH THE FONT USED IN THE PICTURE!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis listing comes with six sizes: \u003cbr data-mce-fragment=\"1\"\u003e4x4 hoop - 2 3\/4 x 3 15\/16 inches with 2,878 Stitches\u003cbr data-mce-fragment=\"1\"\u003e5x7 hoop - 4 1\/8 x 7 inches with 4,736 Stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 hoop - 4 3\/4 x 7 7\/8 inches with 5,410 Stitches\u003cbr data-mce-fragment=\"1\"\u003e5x12 hoop - 5 1\/8 x 9 1\/8 inches with 6,299 Stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 hoop - 5 11\/16 x 10 1\/8 inches with 6,858 Stitches\u003cbr data-mce-fragment=\"1\"\u003e8x12 hoop - 6 1\/2 x 11 5\/8 inches with 7,866 Stitches\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616558715096,"sku":"10889","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/MOMSplitDiamond.jpg?v=1673626748"},{"product_id":"kentucky-two-layer-zigzag-applique-embroidery-three-sizes-8x8-hoop-6x10-hoop-and-8x12-hoop","title":"KENTUCKY Two Layer Zigzag Applique Embroidery Three Sizes 8x8 Hoop, 6x10 Hoop and  8x12 Hoop","description":"\u003cp\u003eShow your Kentucky spirit with this cute applique embroidery design featuring a quick-stitching zigzag edge.\u003c\/p\u003e\n\u003cp\u003eAvailable in three sizes to fit: \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e8x8 hoop - 3 1\/2 x 7 7\/8 inches with 6,774 stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 hoop - 4 1\/2 x 10 3\/16 inches with 8,484 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x12 hoop - 5 3\/16 x 11 13\/16 inches with 9,772 stitches \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616559403224,"sku":"10633","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/files\/KentuckyDoubleLayerZZ.jpg?v=1708021262"},{"product_id":"ky-state-applique-embroidery-with-kentucky-script-overlap-zigzag-stitch-three-sizes-for-6x10-8x8-and-8x12-hoop","title":"KY State Applique Embroidery with Kentucky Script Overlap Zigzag Stitch Three Sizes for 6x10, 8x8, and 8x12 Hoop","description":"\u003cp\u003eThis unique Kentucky KY state zigzag applique embroidery design is sure to become a favorite! An applique embroidery design featuring one layer of fabric with a zigzag finishing stitch. Overlapping the state applique, is \"Kentucky\" in a modern script font.\u003c\/p\u003e\n\u003cp\u003eThis listing comes with three sizes to fit:\u003c\/p\u003e\n\u003cp\u003e8x8 hoop - 3 11\/16 x 7 13\/16 inches with 6,441 stitches\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 4 13\/16 x 10 3\/16 inches with 8,234 stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 5 7\/16 x 11 5\/8 inches with 9,324 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616559894744,"sku":"10673","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYStateAngledScript.jpg?v=1678206267"},{"product_id":"ky-applique-embroidery-cutout-patch-zigzag-stitch-two-sizes-for-6x10-hoop-and-8x12-hoop-kentucky","title":"KY Applique Embroidery Cutout Patch Zigzag Stitch Two Sizes for 6x10 Hoop and 8x12 Hoop Kentucky","description":"\u003cp\u003eShow your Kentucky state spirit with this cute KY block font zigzag applique design!! This is a unique design that's an applique patch with the letters cutout of the applique fabric and the background item showing through.\u003c\/p\u003e\n\u003cp\u003eListing comes with two sizes to fit:\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 6 5\/16 x 8 13\/16 inches with 4,334 stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 7 3\/4 x 10 15\/16 inches with 5,333 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616559960280,"sku":"10647","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYCutoutSquare.jpg?v=1679493874"},{"product_id":"line-wife-lightening-bolt-applique-embroidery-zigzag-stitch-8x12-hoop","title":"Line Wife Lightening Bolt Applique Embroidery Zigzag Stitch 8x12 Hoop","description":"\u003cp\u003eAnyone who is a LINE WIFE will love this design with a quick zigzag edge stitch and a lightening bolt.\u003c\/p\u003e\n\u003cp\u003eAn applique embroidery design featuring one layer of fabric with a zigzag finishing stitch. Sized to fit:\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 5 1\/16 x 11 9\/16 inches with 6,964 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616560025816,"sku":"10706","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/LineWife.jpg?v=1679501733"},{"product_id":"lips-zz-xoxo-applique-embroidery-design-valentines-day-8x12","title":"Lips ZZ XOXO Applique Embroidery Design Valentine's Day 8x12","description":"\u003cp\u003eThese applique zigzag edge embroidered lips are sure to get you in the mood for Valentine's Day!\u003c\/p\u003e\n\u003cp\u003eThis listing includes six sizes:\u003cbr data-mce-fragment=\"1\"\u003e4x4 - 2 13\/16 x 3 ⅞ inches with 2,170 stitches\u003cbr data-mce-fragment=\"1\"\u003e5x7 - 4 11\/16 x 6 15\/16 inches with 3,769 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 - 5 ¼ x 7 ¾ inches with 4,202 stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 - 6 ¼ x 9 3\/16 inches with 5,013 stitches\u003cbr data-mce-fragment=\"1\"\u003e7x12 - 7 x 10 15\/16 inches with 5,603 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x12 - 7 11\/16 x 11 ⅜ inches with 6,148 stitches\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr data-mce-fragment=\"1\"\u003eHat (60mm x 130mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e4x4 (100mm x 100mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e5x7 (130mm x 180mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e6x10 (160mm x 260mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e8x8 (200mm x 200mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e7x12 (180mm x 300mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e8x12 (200mm x 300mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e10.5x16 (272mmx460mm)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAPPLIQUÉ INSTRUCTIONS:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616560091352,"sku":"10717","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/LIPSXOXO.jpg?v=1671731062"},{"product_id":"mama-applique-embroidery-zigzag-design-patch-with-cutout-letters-two-sizes-6x10-8x12-hoop","title":"MAMA Applique Embroidery Zigzag Design Patch with Cutout Letters Two Sizes 6x10 8x12 Hoop","description":"\u003cp\u003eTreat yourself or your mama to this really cute embroidery design!! This is a unique design with the letters cut out from the square applique patch, showing the fabric of the item being embroidered.\u003c\/p\u003e\n\u003cp\u003eThis listing comes in two sizes to fit:\u003cbr\u003e6x10 hoop - 6 1\/4 x 6 1\/4 inches with 4,849 stitches\u003cbr\u003e8x12 hoop - 7 13\/16 x 7 13\/16 inches with 5,977 stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616560124120,"sku":"10757","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/MAMASquareCutoutZZ_a0b9000d-d025-4a81-8d6e-ed53e1dc5093.jpg?v=1679503658"},{"product_id":"ky-applique-embroidery-kentucky-chunky-block-machine-embroidery-sizes-8x8-6x10-and-8x12-each-with-bean-raggy-stitch-and-zigzag-stitch","title":"KY Applique Embroidery Kentucky Chunky Block Machine Embroidery Sizes 8x8, 6x10, and 8x12 Each With Bean (raggy) Stitch and Zigzag Stitch","description":"\u003cp\u003eShow your Kentucky state spirit with this chunky applique embroidery font!! This design comes with three sizes, each with two different edge stitch options: zigzag and raggy (bean) stitch.\u003c\/p\u003e\n\u003cp\u003eAlso, let me know if you'd like this design for a different state!\u003c\/p\u003e\n\u003cp\u003eListing comes in three sizes to fit:\u003c\/p\u003e\n\u003cp\u003eRaggy:\u003cbr\u003e8x8 hoop - 5 1\/4 x 7 13\/16 inches with 2,248 Stitches\u003cbr\u003e6x10 hoop - 6 3\/16 x 9 1\/4 inches with 2,633 Stitches\u003cbr\u003e8x12 hoop - 7 11\/16 x 11 7\/16 inches with 3,288 Stitches\u003cbr\u003e\u003cbr\u003eZigZag:\u003cbr\u003e8x8 hoop - 5 5\/16 x 7 7\/8 inches with 2,525 Stitches\u003cbr\u003e6x10 hoop - 6 3\/16 x 9 1\/4 inches with 2,978 Stitches\u003cbr\u003e8x12 hoop - 7 3\/4 x 11 9\/16 inches with 3,701 Stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616561303768,"sku":"10653","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYChunkyBlock.jpg?v=1677252651"},{"product_id":"ky-applique-embroidery-double-bean-stitch-with-kentucky-satin-stitch-script-overlap-three-sizes-6x10-8x8-and-8x12-hoop","title":"KY Applique Embroidery Double Bean Stitch with Kentucky Satin Stitch Script Overlap Three Sizes 6x10, 8x8, and 8x12 Hoop","description":"\u003cp\u003eShow your Kentucky state spirit with this cute applique embroidery design with a double bean stitch raggy edge KY applique and \"kentucky\" in a trendy script overlapping the applique!!\u003c\/p\u003e\n\u003cp\u003eThis listing comes in three sizes to fit:\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 6 3\/16 x 7 7\/16 inches with 12,225 stitches\u003c\/p\u003e\n\u003cp\u003e8x8 hoop - 6 1\/2 x 7 13\/16 inches with 12,799 stiches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 7 13\/16 x 9 3\/8 inches with 15,305 stitches \u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616561369304,"sku":"10649","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYKentuckyScript.jpg?v=1678212051"},{"product_id":"ky-applique-embroidery-kentucky-3d-effect-zigzag-stitch-two-sizes-to-fit-8x12-hoop-and-8x8-or-6x10-hoop","title":"KY Applique Embroidery Kentucky 3D Effect Zigzag Stitch Two Sizes to fit 8x12 Hoop and 8x8 or 6x10 Hoop","description":"\u003cp\u003eShow your Kentucky state spirit with this unique applique embroidery design that has a 3D effect zigzag stitch!\u003c\/p\u003e\n\u003cp\u003eAn applique embroidery design featuring one layer of fabric with a zigzag finishing stitch. This design does not use embroidery puff foam, so is not a true 3D design. It simply has top-stitching that gives the effect of a 3D letter.\u003c\/p\u003e\n\u003cp\u003eListing includes two sizes that will fit:\u003cbr\u003e8x8\/6x10 hoop - 6 3\/16 x 7 7\/8 inches with 6,272 Stitches\u003cbr\u003e8x12 hoop - 7 5\/8 x 9 3\/4 inches with 7,631 Stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616561402072,"sku":"10650","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KY3DEffectHoratioDBold.jpg?v=1677083082"},{"product_id":"mom-life-applique-with-satin-script-embroidery-design-diamond-edge-stitch-three-sizes-5x7-6x10-and-8x12-hoop","title":"MOM Life Applique with Satin Script Embroidery Design Diamond Edge Stitch Three Sizes 5x7, 6x10, and 8x12 Hoop","description":"\u003cp\u003eThis MOM Life applique embroidery design combines a block applique font with a diamond edge stitch with a swirly satin stitch script overlapping the applique.\u003c\/p\u003e\n\u003cp\u003eThis design come with three sizes to fit:\u003cbr\u003e5x7 hoop - 4 5\/8 x 7 1\/16 inches with 8,270 Stitches\u003cbr\u003e6x10 hoop - 6 1\/4 x 9 1\/2 inches with 10,807 Stitches\u003cbr\u003e8x12 hoop - 7 11\/16 x 11 5\/8 inches with 14,113 Stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616561565912,"sku":"10887","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/MOMLife_8d5984d0-d66b-4593-8ea6-4d9ab918f818.jpg?v=1674830464"},{"product_id":"lucky-two-layer-zz-applique-embroidery-design-st-patricks-day-st-paddy-three-sizes-6x10-8x8-8x12-hoops","title":"LUCKY Two Layer ZZ Applique Embroidery Design St. Patrick's Day St. Paddy Three Sizes 6x10, 8x8, 8x12 Hoops","description":"\u003cp\u003eAre you feeling LUCKY? You'll definitely want to add this two layer zigzag applique design to your embroidery collection.\u003c\/p\u003e\n\u003cp\u003eAvailable in three sizes to fit:\u003c\/p\u003e\n\u003cp\u003e8x8 hoop - 4 3\/8 x 7 7\/8 inches with 5,973 Stitches\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 5 11\/16 x 10 1\/4 inches with 7,484 Stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 6 1\/2 x 11 3\/4 inches with 9,049 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616561664216,"sku":"10743","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/LUCKYTwoLayer.jpg?v=1676479928"},{"product_id":"rma-block-zigzag-applique-embroidery-quick-stitch-shirt-design-three-sizes-5x7-6x10-and-8x12-hoop","title":"RMA Block ZigZag Applique Embroidery Quick Stitch Shirt Design Three Sizes 5x7, 6x10, and 8x12 Hoop","description":"\u003cp\u003eCute applique embroidery design for your favorite RMA Registered Medical Assistant! It comes with a zigzag edge stitch for a quick stitch out.\u003c\/p\u003e\n\u003cp\u003eListing comes with three sizes to fit:\u003c\/p\u003e\n\u003cp\u003e5x7 hoop - 3 5\/16 x 7 1\/16 inches with 3,193 Stitches\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 4 3\/4 x 10 1\/8 inches with 4,476 Stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 5 1\/4 x 11 5\/16 inches with 4,973 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616561795288,"sku":"11124","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/RMA.jpg?v=1677175518"},{"product_id":"homeschool-mom-applique-embroidery-design-zigzag-applique-mothers-day-thanksgiving-gift-8x12-hoop","title":"Homeschool Mom Applique Embroidery Design zigzag applique Mother's Day Thanksgiving Gift 8x12 Hoop","description":"\u003cp\u003eHomeschool Moms, show your spirit with this applique embroidery design in a bold block font with a quick-stitching zigzag edge!!\u003c\/p\u003e\n\u003cp\u003eListing includes one size to fit:\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 7 5\/8 x 11 3\/8 inches with 10,360 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616561828056,"sku":"10504","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/HomeschoolMom.jpg?v=1679332857"},{"product_id":"kentucky-arched-varsity-applique-embroidery-zigzag-stitch-8x12-hoop","title":"KENTUCKY Arched Varsity Applique Embroidery Zigzag Stitch 8x12 Hoop","description":"\u003cp\u003eShow your Kentucky state pride with this cute applique embroidery design featuring a quick-stitching zigzag edge.\u003c\/p\u003e\n\u003cp\u003eOverall size to fit:\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 4 3\/8 x 11 13\/16 inches with 6,957 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616561959128,"sku":"10599","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KentuckyArchedVarsity_dd099c18-6a3a-4743-ba2c-d3b67506d27f.jpg?v=1673373585"},{"product_id":"lips-zz-applique-with-lucky-script-embroidery-design-st-patricks-day-8x12-st-paddy","title":"Lips ZZ Applique with Lucky Script Embroidery Design St. Patrick's Day 8x12 St. Paddy","description":"\u003cp\u003eThese applique lips are sure to get you in the mood for St. Patrick's Day!\u003c\/p\u003e\n\u003cp\u003eOverall size will fit:\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 7 7\/16 x 11 3\/4 inches with 7,831 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch. No physical product will be sent to you. This is an embroidery file and you must have an embroidery machine to use this product.\u003cbr\u003e\u003cbr\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003cbr\u003e\u003cbr\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003cbr\u003e\u003cbr\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003cbr\u003e\u003cbr\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003cbr\u003e\u003cbr\u003eAPPLIQUÉ INSTRUCTIONS:\u003cbr\u003e\u003cbr\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003cbr\u003e\u003cbr\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003cbr\u003e\u003cbr\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003cbr\u003e\u003cbr\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003cbr\u003e\u003cbr\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003cbr\u003e\u003cbr\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003cbr\u003e\u003cbr\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616564875480,"sku":"10716","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/LUCKYLips.jpg?v=1676480553"},{"product_id":"pennsylvania-applique-embroidery-with-script-satin-stitch-overlap-design-full-chest-8x12-hoop-pa-zigzag-stitch","title":"Pennsylvania Applique Embroidery with Script Satin Stitch Overlap Design Full Chest 8x8, 6x10, and 8x12 Hoop PA Zigzag Stitch","description":"\u003cp\u003eShow your Pennsylvania PA state spirit with this cute applique embroidery design!!\u003c\/p\u003e\n\u003cp\u003eAn embroidery design featuring one layer of fabric with a zigzag finishing stitch and a satin stitch script overlapping the applique.\u003c\/p\u003e\n\u003cp\u003eOverall size is 195mm tall x 293mm wide, to fit:\u003c\/p\u003e\n\u003cp\u003e8x8 hoop - 5 7\/8 x 7 13\/16 inches with 7,912 Stitches\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 6 1\/4 x 9 3\/8 inches with 11,741 Stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 7 11\/16 x 11 9\/16 inches with 14,403 Stitches\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616565235928,"sku":"11046","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/PennsylvaniaStatewScript.jpg?v=1677172698"},{"product_id":"mardi-gras-lips-zz-applique-embroidery-design-in-two-sizes-6x10-hoop-and-8x12-hoop","title":"Mardi Gras Lips ZZ Applique Embroidery Design in Two Sizes 6x10 Hoop and 8x12 Hoop","description":"\u003cp\u003eThis applique Mardi Gras lip embroidery design is sure to get you in the mood for Mardi Gras!\u003c\/p\u003e\n\u003cp\u003eListing comes in two sizes to fit:\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 6 1\/4 x 9 11\/16 inches with 7,759 Stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 7 5\/8 x 11 3\/4 inches with 9,255 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.  Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.  For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using.  Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches.  Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616565891288,"sku":"10811","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/MardiGrasLips.jpg?v=1676672171"},{"product_id":"ky-state-applique-embroidery-with-kentucky-script-overlap-zigzag-stitch-three-sizes-for-8x8-6x10-and-8x12-hoops","title":"KY State Applique Embroidery with Kentucky Script Overlap Zigzag Stitch Four Sizes for 5x7, 8x8, 6x10, and 8x12 hoops","description":"\u003cp\u003eThis zigzag applique embroidery design of the state of Kentucky with a modern satin stitch script overlap stitches beautifully!\u003c\/p\u003e\n\u003cp\u003eThis listing comes with four sizes which will fit:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e5x7 hoop - 4 1\/16 x 7 1\/16 inches with 9,007 stitches                                                        8x8 hoop - 4 1\/2 x 7 3\/4 inches with 9,936 stitches\u003cbr\u003e6x10 hoop - 5 11\/16 x 9 15\/16 inches with 13,052 stitches\u003cbr\u003e8x12 hoop - 6 11\/16 x 11 5\/8 inches with 14,695 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616566317272,"sku":"10674","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KentuckyStateOverlapScript.jpg?v=1679494902"},{"product_id":"rdh-dental-hygienist-block-zigzag-applique-embroidery-quick-stitch-shirt-design-three-sizes-5x7-6x10-and-8x12-hoop","title":"RDH Dental Hygienist Block ZigZag Applique Embroidery Quick Stitch Shirt Design Three Sizes 5x7, 6x10, and 8x12 Hoop","description":"\u003cp\u003eCute applique embroidery design for your favorite RDH Registered Dental Hygienist! It comes with a zigzag edge stitch for a quick stitch out.\u003c\/p\u003e\n\u003cp\u003eYou are purchasing an embroidery design which must be stitched using an embroidery machine. This is not a patch!\u003c\/p\u003e\n\u003cp\u003eAn applique embroidery design featuring one layer of fabric with a zigzag finishing stitch.\u003c\/p\u003e\n\u003cp\u003eListing comes with three sizes to fit:\u003c\/p\u003e\n\u003cp\u003e5x7 hoop - 3 5\/8 x 7 1\/16 inches with 3,035 stitches\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 5 3\/16 x 10 1\/8 inches with 4,243 stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 5 15\/16 x 11 5\/8 inches with 4,852\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, SEW, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be sold, reproduced, or shared in any way.\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on embroidery designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616566972632,"sku":"11106","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/RDHBlock.jpg?v=1678387453"},{"product_id":"pharmacy-tech-block-zigzag-applique-embroidery-quick-stitch-shirt-design-two-sizes-6x10-and-8x12-hoop","title":"Pharmacy Tech Block ZigZag Applique Embroidery Quick Stitch Shirt Design Two Sizes 6x10 and 8x12 Hoop","description":"\u003cp\u003eCute applique embroidery design for your favorite Pharmacy Technician! It comes with a zigzag edge stitch for a quick stitch out. An applique embroidery design featuring one layer of fabric with a zigzag finishing stitch.\u003c\/p\u003e\n\u003cp\u003eListing comes with two sizes to fit:\u003cbr\u003e6x10 hoop - 5 3\/16 x 10 1\/4 inches with 7,437 Stitches\u003cbr\u003e8x12 hoop - 5 15\/16 x 11 3\/4 inches with 8,541 Stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616567005400,"sku":"11047","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/PHARMACYTECHzz.jpg?v=1673288714"},{"product_id":"nursing-student-block-zigzag-applique-embroidery-quick-stitch-shirt-design-two-sizes-6x10-and-8x12-hoop","title":"NURSING STUDENT Block ZigZag Applique Embroidery Quick Stitch Shirt Design Two Sizes 6x10, and 8x12 Hoop","description":"\u003cp\u003eCute applique embroidery design for your favorite Nursing Student! It comes with a zigzag edge stitch for a quick stitch out.\u003c\/p\u003e\n\u003cp\u003eListing comes with two sizes to fit:\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 5 1\/4 x 10 1\/4 inches with 8,596 Stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 5 15\/16 x 11 11\/16 inches with 9,650 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.  Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.  For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using.  Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches.  Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616567103704,"sku":"10983","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/NursingStudent.jpg?v=1677255195"},{"product_id":"love-heart-zigzag-applique-embroidery-design-valentines-day-8x12","title":"LOVE Heart Zigzag Applique Embroidery Design Valentine's Day 8x12","description":"\u003cp\u003eAll we need is LOVE, and this cute zigzag applique embroidery design is a great way to show your love of love!\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes:\u003cbr data-mce-fragment=\"1\"\u003e5x7 - 3 15\/16 x 7 inches with 3,269 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 - 4 ⅜ x 7 ¾ inches with 3,635 stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 - 5 11\/16 x 10 ⅛ inches with 4,673 stitches\u003cbr data-mce-fragment=\"1\"\u003e7x12 - 6 ½ x 11 11\/16 inches with 5,363 stitches\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr data-mce-fragment=\"1\"\u003eHat (60mm x 130mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e4x4 (100mm x 100mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e5x7 (130mm x 180mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e6x10 (160mm x 260mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e8x8 (200mm x 200mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e7x12 (180mm x 300mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e8x12 (200mm x 300mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e10.5x16 (272mmx460mm)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAPPLIQUÉ INSTRUCTIONS:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616567398616,"sku":"10736","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/LOVEHeart.jpg?v=1671732607"},{"product_id":"phlebotomist-block-zigzag-applique-embroidery-quick-stitch-shirt-design-8x12-hoop","title":"Phlebotomist Block ZigZag Applique Embroidery Quick Stitch Shirt Design 8x12 Hoop","description":"\u003cp\u003eCute applique embroidery design for your favorite phlebotomist!! It comes with a zigzag finishing stitch for a quick stitch out. An applique embroidery design featuring one layer of fabric with a zigzag finishing stitch.\u003c\/p\u003e\n\u003cp\u003eSized to fit:\u003cbr\u003e8x12 hoop - 3 11\/16 x 11 13\/16 inches with 12,763 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616567726296,"sku":"11049","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/PHLEBOTOMISTzz.jpg?v=1677085509"},{"product_id":"kentucky-lower-case-applique-embroidery-raggy-and-zigzag-stitch-8x12-hoop","title":"KENTUCKY Lower Case Applique Embroidery Raggy and Zigzag Stitch 8x12 Hoop","description":"\u003cp\u003eShow your Kentucky spirit with this cute applique embroidery design featuring a quick-stitching raggy or zigzag edge.\u003c\/p\u003e\n\u003cp\u003eOverall size to fit:\u003cbr\u003eRaggy:\u003cbr\u003e8x12 hoop - 3 13\/16 x 11 1\/2 inches with 4,221 Stitches\u003cbr\u003e\u003cbr\u003eZigZag\u003cbr\u003e8x12 hoop - 3 15\/16 x 11 5\/8 inches with 6,413 Stitches \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616569626840,"sku":"10616","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/Kentuckylowercase.jpg?v=1675446472"},{"product_id":"local-tennessee-tn-state-raggy-applique-machine-embroidery-design","title":"LOCAL Tennessee TN State Raggy Applique Machine Embroidery Design","description":"\u003cp\u003eShow your Tennessee state pride!! Full-chest size LOCAL Tennessee State design in the popular raggy applique style! The second picture shows the state of Kentucky in the design, but you are purchasing the state of Tennessee.\u003c\/p\u003e\n\u003cp\u003eAn applique embroidery design featuring one layer of fabric with a raggy edge bean finishing stitch. Overall size:\u003c\/p\u003e\n\u003cp\u003e4 1\/2 x 9 15\/16 inches with 5,313 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616569823448,"sku":"10719","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/TNLocalState.jpg?v=1679330087"},{"product_id":"love-two-layer-zigzag-applique-embroidery-design-valentines-day-five-sizes-5x7-8x8-6x10-7x12-and-8x12-hoop","title":"LOVE Two Layer Zigzag Applique Embroidery Design Valentine's Day Five Sizes 5x7, 8x8, 6x10, 7x12, and 8x12 Hoop","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAll we need is LOVE, and this design is a great way to show your love of love!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis listing includes five sizes:\u003cbr data-mce-fragment=\"1\"\u003e5x7 - 4 11\/16 x 7 1\/16 inches with 5,927 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 - 5 1\/4 x 7 7\/8 inches with 6,543 stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 - 6 5\/16 x 9 7\/16 inches with 7,761 stitches\u003cbr data-mce-fragment=\"1\"\u003e7x12 - 7 1\/16 x 10 5\/8 inches with 8,720 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x12 - 7 13\/16 x 11 3\/4 inches with 9,590 stitches\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616570020056,"sku":"10741","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/files\/LoveTwoLayerTrawll.jpg?v=1707146011"},{"product_id":"love-cow-heifer-zigzag-applique-machine-embroidery-design-8x12-hoop","title":"LOVE Cow Heifer Zigzag Applique Machine Embroidery Design 8x12 Hoop","description":"\u003cp\u003eCows are so lovable, especially with this cute applique design! It comes in one size with a zigzag edge.\u003c\/p\u003e\n\u003cp\u003eAn applique embroidery design featuring two different fabrics for a layered look. Overall size is 6 ⅜\" tall x 11 ⅝\" wide. Sized to fit:\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 6 5\/16 x 11 11\/16 inches with 5,196 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616571166936,"sku":"10732","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/LOVECowApp.jpg?v=1678200992"},{"product_id":"kansas-applique-embroidered-script-ks-design-full-chest-8x12-hoop","title":"Kansas Applique Embroidered Script KS Design Full Chest 8x12 Hoop","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eShow your Kansas state spirit with this cute embroidery design!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis listing includes four sizes:\u003cbr data-mce-fragment=\"1\"\u003e5x7 hoop - 4 1\/16 x 7 1\/16 inches with 8,454 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 hoop - 4 9\/16 x 7 7\/8 inches with 9,376 stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 hoop - 5 7\/8 x 10 3\/16 inches with 12,673 stitches\u003cbr data-mce-fragment=\"1\"\u003e7x12 hoop - 6 3\/4 x 11 13\/16 inches with 16,530 stitches\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616574312664,"sku":"10591","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KansasStatewScript.jpg?v=1677169436"},{"product_id":"missouri-state-zigzag-applique-with-script-overlap-machine-embroidery-design-8x12-hoop-mo","title":"Missouri State Zigzag Applique with Script Overlap Machine Embroidery Design 8x12 Hoop MO","description":"\u003cp\u003eWhere are my Missouri lovers? Show your love of your state with this cute design! It comes in one size with a zigzag finishing stitch and an overlapping script in a satin stitch.\u003c\/p\u003e\n\u003cp\u003eOverall size is 7 9\/16 x 11 5\/8 inches with 12,618 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616578244824,"sku":"10881","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/MissouriStatewScript.jpg?v=1677095838"},{"product_id":"indiana-state-zigzag-applique-with-script-overlap-machine-embroidery-design-8x12-hoop-in","title":"Indiana State Zigzag Applique with Script Overlap Machine Embroidery Design 8x12 Hoop IN","description":"\u003cp\u003eAre you an Indiana fan? Show your love of your state with this cute design! It comes in one size with a zigzag finishing stitch and an overlapping script in a satin stitch.\u003c\/p\u003e\n\u003cp\u003eOverall size to fit:\u003cbr\u003e8x12 hoop - 7 3\/4 x 11 inches with 11,134 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616578310360,"sku":"10547","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/IndianaStateScript.jpg?v=1675443854"},{"product_id":"love-christmas-tree-applique-machine-embroidery-design-with-zigzag-edge-stitch-8x12-hoop","title":"LOVE Christmas Tree Applique Machine Embroidery Design with ZigZag Edge Stitch 8x12 Hoop","description":"\u003cp\u003eThis applique embroidery design is sure to bring you lots of LOVE at Christmas! It has a quick-stitching zigzag edge.\u003c\/p\u003e\n\u003cp\u003eThis listing includes three sizes to fit:\u003cbr\u003e5x7 - 3 5\/8 x 7 1\/16 inches with 3,133 stitches\u003cbr\u003e6x10 - 5 3\/16 x 10 1\/4 inches with 4,409 stitches\u003cbr\u003e8x12 hoop - 6 x 11 13\/16 inches with 5,051 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copywrite laws.\u003c\/p\u003e\n\u003cp\u003e\u2028\u2028This is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u2028\u003cbr\u003e 5x7 (130mm x 180mm)\u2028\u003cbr\u003e 6x10 (160mm x 260mm)\u2028\u003cbr\u003e 8x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616580669656,"sku":"10731","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/LOVEChristmasTree.png?v=1678199808"},{"product_id":"single-zigzag-heart-applique-embroidery-design-valentines-day-110mm-x-129mm-5x7-hoop","title":"Single Zigzag Heart Applique Embroidery Design Valentine's Day 4x4, 5x7, and 6x10 hoop","description":"\u003cp\u003eAll we need is LOVE, and this design is a great way to show your heart of love!\u003c\/p\u003e\n\u003cp\u003eAvailable in three sizes: \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e4x4 hoop - 3 x 3 15\/16 inches with 699 Stitches\u003cbr data-mce-fragment=\"1\"\u003e5x7 hoop - 4 1\/2 x 5 7\/8 inches with 1033 Stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 hoop - 5 15\/16 x 7 13\/16 inches with 1359 Stitches\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616582668504,"sku":"11162","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/SingleHeartZZ.jpg?v=1672336732"},{"product_id":"merry-two-layer-christmas-applique-embroidery-design-with-zigzag-finishing-stitch-8x12-hoop","title":"Merry Two Layer Christmas Applique Embroidery Design with Zigzag Finishing Stitch Four Sizes","description":"\u003cp\u003eWho's ready for Christmas? This cute design combines zigzag applique with two layers of fabric for a unique look.\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes to fit:\u003cbr\u003e5x7 hoop - 3 13\/16 x 7 1\/16 inches with 5,470 Stitches\u003cbr\u003e8x8 hoop - 4 1\/4 x 7 7\/8 inches with 5,974 Stitches\u003cbr\u003e6x10 hoop - 5 1\/2 x 10 1\/4 inches with 7,591 Stitches\u003cbr\u003e8x12 hoop - 6 x 11 3\/4 inches with 8,565 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616583782616,"sku":"10849","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/MerryTrawllDoubleLayer.jpg?v=1677080507"},{"product_id":"love-camper-camping-raggy-applique-machine-embroidery-design","title":"LOVE Camper Camping Raggy Applique Machine Embroidery Design One Size 8x12","description":"\u003cp\u003eWho loves to go camping?! Check out this fun design! Full-chest size LOVE Camping design in the popular raggy applique style!\u003c\/p\u003e\n\u003cp\u003eAn applique embroidery design featuring fabric with a raggy edge bean finishing stitch. Overall size is 5.25\" tall x 10\" wide. Sized to fit:\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 5 1\/4 x 9 15\/16 inches with 5,323 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616585224408,"sku":"10730","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/LOVECamperApp.jpg?v=1678202792"},{"product_id":"kentucky-split-state-applique-embroidery-design-july-4th-ky-8x12-hoop","title":"Kentucky Split State Applique Embroidery Design July 4th KY 8x12 Hoop","description":"\u003cp\u003eShow your American spirit and Kentucky state pride with this cute applique design! An applique embroidery design featuring two layers of fabric with a zigzag finishing stitch. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOverall size to fit:\u003cbr\u003e8x12 hoop - 5 9\/16 x 11 9\/16 inches with 2,707 Stitches \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616585388248,"sku":"10628","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYSplitStateZZ_75b73cb5-8b21-4150-8c55-4f1bdbc94595.jpg?v=1675822797"},{"product_id":"merry-christmas-applique-machine-embroidery-design-with-zigzag-finishing-stitch-and-satin-script-8x12-hoop","title":"Merry Christmas Applique Machine Embroidery Design with Zigzag Finishing Stitch and Satin Script Five sizes 4x4, 5x7, 8x8, 6x10, and 8x12 Hoop","description":"\u003cp\u003eWho's ready for Christmas? This cute design combines zigzag applique and satin stitch script for a unique look.\u003c\/p\u003e\n\u003cp\u003eAn applique embroidery design featuring one fabric and a satin script.\u003c\/p\u003e\n\u003cp\u003eThis listing includes five sizes:\u003cbr\u003e4x4 hoop - 2 3\/4 x 3 7\/8 inches with 3,849 stitches\u003cbr\u003e5x7 hoop - 4 1\/2 x 7 1\/16 inches with 6,217 stitches\u003cbr\u003e8x8 hoop - 5 x 7 7\/8 inches with 6,732 stitches\u003cbr\u003e6x10 hoop - 6 1\/8 x 10 1\/4 inches with 9,408 stitches\u003cbr\u003e8x12 hoop - 6 15\/16 x 11 5\/8 inches with 10,558 stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030229720,"sku":"10836","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/il_fullxfull.4306560128_k4fi_409e1109-dfd0-4c2f-a9e7-fae63b8898e1.jpg?v=1669369563"},{"product_id":"joy-kentucky-gnome-applique-machine-embroidery-design-zigzag-edge-stitch-four-sizes-5x7-8x8-6x10-8x12-hoop","title":"Joy Kentucky Gnome Applique Machine Embroidery Design ZigZag Edge Stitch Four Sizes 5x7, 8x8, 6x10, 8x12 Hoop","description":"\u003cp\u003eThis cute Kentucky gnome applique embroidery design is sure to bring you lots of Christmas JOY! This design has a quick-stitching zigzag edge.\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes to fit:\u003c\/p\u003e\n\u003cp\u003e5x7 hoop - 4 1\/4 x 7 1\/16 inches with 3,715 stitches\u003c\/p\u003e\n\u003cp\u003e8x8 hoop - \u003cspan data-mce-fragment=\"1\"\u003e4 1\/4 x 7 1\/16 inches with 3,715 stitches\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 6 1\/8 x 10 3\/16 inches with 5,106 stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 7 1\/16 x 11 3\/4 inches with 5,799 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u2028\u003cbr\u003e 5x7 (130mm x 180mm)\u2028\u003cbr\u003e 6x10 (160mm x 260mm)\u2028\u003cbr\u003e 8x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030262488,"sku":"10585","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/JOYKYGnomeZZApp.jpg?v=1679941596"},{"product_id":"kentucky-zigzag-applique-embroidery-design-shaped-like-the-state-of-ky-four-sizes-5x7-8x8-6x10-8x12-hoop","title":"KENTUCKY Zigzag Applique Embroidery Design Shaped Like the State of KY Four Sizes 5x7, 8x8, 6x10, 8x12 Hoop","description":"\u003cp\u003eShow your Kentucky spirit with this cute applique embroidery design featuring a quick-stitching zigzag edge.\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes to fit:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e5x7 hoop - 3 1\/2 x 7 1\/16 inches with 4,469 Stitches\u003cbr\u003e8x8 hoop - 3 7\/8 x 7 7\/8 inches with 4,972 Stitches\u003cbr\u003e6x10 hoop - 5 1\/16 x 10 1\/4 inches with 6,357 Stitches\u003cbr\u003e8x12 hoop - 5 3\/4 x 11 5\/8 inches with 7,065 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u2028\u003cbr\u003e 5x7 (130mm x 180mm)\u2028\u003cbr\u003e 6x10 (160mm x 260mm)\u2028\u003cbr\u003e 8x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030295256,"sku":"10634","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KentuckyStateShapeApp.jpg?v=1672855871"},{"product_id":"merry-two-layer-christmas-applique-embroidery-design-with-zigzag-finishing-stitch-four-sizes-5x7-8x8-6x10-8x12-hoop","title":"Merry Two Layer Christmas Applique Embroidery Design with Zigzag Finishing Stitch Four Sizes 5x7, 8x8, 6x10, 8x12 Hoop","description":"\u003cp\u003eWho's ready for Christmas? This cute Merry applique embroidery design combines zigzag applique with two layers of fabric for a unique look.\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes to fit:\u003cbr\u003e5x7 hoop - 4 1\/8 x 7 1\/16 inches with 6,083 stitches\u003cbr\u003e8x8 hoop - 4 1\/8 x 7 1\/16 inches with 6,083 stitches\u003cbr\u003e6x10 hoop - 5 15\/16 x 10 3\/16 inches with 8,459 stitches\u003cbr\u003e8x12 hoop - 6 7\/8 x 11 13\/16 inches with 9,378 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u20284x4 (100mm x 100mm)\u20285x7 (130mm x 180mm)\u20286x10 (160mm x 260mm)\u20288x8 (200mm x 200mm)\u20287x12 (180mm x 300mm)\u20288x12 (200mm x 300mm)\u20289.5x14 (240mm x 360mm)\u202810.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030360792,"sku":"10850","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/MerryScriptTwoLayer.jpg?v=1680023549"},{"product_id":"love-gingerbread-man-applique-machine-embroidery-design-with-zigzag-edge-stitch-five-sizes-4x4-5x7-8x8-6x10-and-8x12-hoop","title":"LOVE Gingerbread Man Applique Machine Embroidery Design with ZigZag Edge Stitch Five Sizes 4x4, 5x7, 8x8 6x10, and 8x12 Hoop","description":"\u003cp\u003eThis gingerbread man applique embroidery design is sure to bring you lots of LOVE! It has a quick-stitching zigzag edge.\u003c\/p\u003e\n\u003cp\u003eThis listing includes five sizes to fit:\u003cbr\u003e4x4 hoop - 2 3\/16 x 3 15\/16 inches with 2,531 stitches\u003cbr\u003e5x7 hoop - 3 7\/8 x 7 1\/16 inches with 4,412 stitches\u003cbr\u003e8x8 hoop - 4 5\/16 x 7 13\/16 inches with 4,872 stitches\u003cbr\u003e6x10 hoop - 5 5\/8 x 10 1\/4 inches with 6,369 stitches\u003cbr\u003e8x12 hoop - 6 7\/16 x 11 3\/4 inches with 7,277 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copywrite laws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u2028\u003cbr\u003e 5x7 (130mm x 180mm)\u2028\u003cbr\u003e 6x10 (160mm x 260mm)\u2028\u003cbr\u003e 8x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030426328,"sku":"10733","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/LOVEGingerbreadMan.jpg?v=1678200624"},{"product_id":"jolly-two-layer-christmas-applique-embroidery-design-with-zigzag-edge-stitch-four-sizes-5x7-8x8-6x10-8x12-hoop","title":"Jolly Two Layer Christmas Applique Embroidery Design with Zigzag Edge Stitch Four Sizes 5x7, 8x8, 6x10, 8x12 Hoop","description":"\u003cp\u003eWho's ready for Christmas?  This cute JOLLY applique embroidery design combines two layers of fabric with a quick-stitching zigzag edge.\u003c\/p\u003e\n\n\u003cp\u003eThis listing includes four sizes:\u003cbr\u003e\n5x7 - 103mm x 180xx, 5060 stitches\u003cbr\u003e\n8x8 - 114mm x 200mm, 5605 stitches\u003cbr\u003e\n6x10 - 148mm x 260mm, 7166 stitches\u003cbr\u003e\n8x12 - 170mm x 300mm, 8245 stitches\u003c\/p\u003e\n\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copywrite laws.\u2028\u2028\u003c\/p\u003e\n\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e\nHat (60mm x 130mm)\u2028\u003cbr\u003e\n4x4 (100mm x 100mm)\u2028\u003cbr\u003e\n5x7 (130mm x 180mm)\u2028\u003cbr\u003e\n6x10 (160mm x 260mm)\u2028\u003cbr\u003e\n8x8 (200mm x 200mm)\u2028\u003cbr\u003e\n7x12 (180mm x 300mm)\u2028\u003cbr\u003e\n8x12 (200mm x 300mm)\u2028\u003cbr\u003e\n9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e\n10.5x16 (272mmx460mm)\u003c\/p\u003e\n\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030459096,"sku":"10579","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/JollyTrawllDoubleLayer.jpg?v=1676319542"},{"product_id":"merry-christmas-applique-machine-embroidery-design-with-zigzag-finishing-stitch-and-satin-script-five-sizes-4x4-5x7-8x8-6x10-8x12-hoop","title":"Merry Christmas Applique Machine Embroidery Design with Zigzag Finishing Stitch and Satin Script One Sizes 8x12 Hoop","description":"\u003cp\u003eWho's ready for Christmas? This cute embroidery design combines zigzag applique and satin stitch script for a unique look.\u003c\/p\u003e\n\u003cp\u003eThis listing includes one sizes to fit:\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 6 13\/16 x 11 5\/8 inches with 15,862 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030491864,"sku":"10835","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/files\/MerryBlockChristmasScriptZZ.jpg?v=1730123547"},{"product_id":"mama-applique-embroidery-design-satin-edge-stitch-academic-font-mothers-day-gift-four-sizes-5x7-8x8-6x10-and-8x12-hoop","title":"MAMA Applique Embroidery Design Satin Edge Stitch Academic Font Mother's Day Gift Four Sizes 5x7, 8x8, 6x10, and 8x12 Hoop","description":"\u003cp\u003eTreat yourself or your MAMA to this really cute applique embroidery design with a satin edge stitch.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis listing comes with four sizes:\u003cbr data-mce-fragment=\"1\"\u003e5x7 hoop - 3 3\/4 x 7 1\/16 inches with 12,845 Stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 hoop - 4 3\/16 x 7 7\/8 inches with 14,323 stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 hoop - 5 7\/16 x 10 3\/16 inches with 18,325 Stitches\u003cbr data-mce-fragment=\"1\"\u003e8x12 hoop - 6 3\/16 x 11 9\/16 inches with 20,429 Stitches\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eA 5x12 split size is also included, but only for PES format.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030524632,"sku":"10753","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/MAMAAcademicSatin.jpg?v=1672774531"},{"product_id":"christmas-tree-trio-applique-machine-embroidery-design-with-2-finishing-stitches-raggy-bean-and-zigzag-8x12-hoop","title":"Christmas Tree Trio Applique Machine Embroidery Design 2 Edge Stitches Raggy (Bean) \u0026 ZigZag Six Sizes 5x7, 8x8, 9x9, 6x10, 7x12, 8x12 Hoop","description":"\u003cp\u003eWho's ready for Christmas?  This Christmas Tree Trio comes in two different finishing stitches.  A bean stitch (raggy edge), and a zigzag stitch.\u003c\/p\u003e\n\u003cp\u003eThis listing includes six sizes for each finishing stitch:\u003cbr\u003eRaggy:\u003cbr\u003e5x7 Hoop - 4 7\/16 x 7 1\/16 inches with 4,587 stitches\u003cbr\u003e8x8  Hoop - 4 15\/16 x 7 7\/8 inches with 5,057 stitches\u003cbr\u003e9x9 Hoop - 5 7\/8 x 9 3\/8 inches with 5,947 stitches\u003cbr\u003e6x10 Hoop - 6 1\/4 x 10 inches with 6,342 stitches\u003cbr\u003e7x12 Hoop - 7 1\/16 x 11 3\/16 inches with 7,131 stitches\u003cbr\u003e8x12 Hoop - 7 5\/16 x 11 5\/8 inches with 7,371 stitches\u003c\/p\u003e\n\u003cp\u003eZigZag:\u003cbr\u003e5x7 Hoop - 4 7\/16 x 7 1\/16 inches with 3,718 stitches\u003cbr\u003e8x8  Hoop - 4 15\/16 x 7 7\/8 inches with 4,127 stitches\u003cbr\u003e9x9 Hoop - 5 7\/8 x 9 3\/8 inches with 4,848 stitches\u003cbr\u003e6x10 Hoop - 6 5\/16 x 10 1\/16 inches with 5,185 stitches\u003cbr\u003e7x12 Hoop - 7 x 11 1\/8 inches with 5,705 stitches\u003cbr\u003e8x12 Hoop - 7 3\/8 x 11 11\/16 inches with 6,011 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u003c\/p\u003e\n\u003cp\u003e6x6 (150mm x 150mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u003c\/p\u003e\n\u003cp\u003e9x9 (240mm x 240mm)\u003c\/p\u003e\n\u003cp\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.  Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.  For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using.  Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches.  Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030590168,"sku":"10213","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/ChristmasTreeTrioRaggy.jpg?v=1677094552"},{"product_id":"ga-georgia-state-applique-zigzag-stitch-with-script-overlap-embroidery-design-four-sizes-5x7-6x10-7x12-and-8x12-hoop","title":"GA Georgia State Applique ZigZag Stitch with Script Overlap Embroidery Design Four Sizes 5x7, 6x10, 7x12, and 8x12 Hoop","description":"\u003cp\u003eShow your Georgia state spirit with this cute applique design with a zigzag edge state and embroidered \"georgia\" overlapping the applique in a split-stitch satin script!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis listing comes in four sizes:\u003cbr data-mce-fragment=\"1\"\u003e5x7 hoop - 5 1\/8 x 6 3\/8 inches with 8,617 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 or 6x10 hoop - 6 5\/16 x 7 7\/8 inches with 10,719 stitches\u003cbr data-mce-fragment=\"1\"\u003e7x12 hoop - 7 1\/16 x 8 7\/8 inches with 10,719 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x12 hoop - 7 3\/4 x 9 3\/4 inches with 15,476 Stitches\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030655704,"sku":"10384","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/GeorgiaStateOverlap.jpg?v=1675269097"},{"product_id":"nana-applique-embroidery-design-diamond-stitch-mothers-day-two-sizes-6x10-and-8x12-hoop","title":"NANA Applique Embroidery Design Diamond Stitch Mother's Day Two Sizes 6x10 and 8x12 Hoop","description":"\u003cp\u003eTreat yourself or your NANA to this really cute applique embroidery design with a split area to add kids names, or last name, or descriptive words!! THIS DESIGN DOES NOT COME WITH THE FONT USED IN THE PICTURE!\u003c\/p\u003e\n\u003cp\u003eThis listing comes with two sizes to fit:\u003cbr data-mce-fragment=\"1\"\u003e6x10 hoop - 4 7\/16 x 10 1\/4 inches with 6,089 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x12 hoop - 5 1\/16 x 11 5\/8 inches with 6,913 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030754008,"sku":"10915","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/NanaSplitDiamondwnames.jpg?v=1678218305"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/collections\/2.png?v=1670930890","url":"https:\/\/justsewembroidery.com\/collections\/applique-embroidery.oembed?page=95","provider":"Justsewembroidery","version":"1.0","type":"link"}