{"title":"All States - Applique","description":"","products":[{"product_id":"kentucky-two-layer-zigzag-applique-embroidery-three-sizes-8x8-hoop-6x10-hoop-and-8x12-hoop","title":"KENTUCKY Two Layer Zigzag Applique Embroidery Three Sizes 8x8 Hoop, 6x10 Hoop and  8x12 Hoop","description":"\u003cp\u003eShow your Kentucky spirit with this cute applique embroidery design featuring a quick-stitching zigzag edge.\u003c\/p\u003e\n\u003cp\u003eAvailable in three sizes to fit: \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e8x8 hoop - 3 1\/2 x 7 7\/8 inches with 6,774 stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 hoop - 4 1\/2 x 10 3\/16 inches with 8,484 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x12 hoop - 5 3\/16 x 11 13\/16 inches with 9,772 stitches \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616559403224,"sku":"10633","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/files\/KentuckyDoubleLayerZZ.jpg?v=1708021262"},{"product_id":"ky-state-applique-embroidery-with-kentucky-script-overlap-zigzag-stitch-three-sizes-for-6x10-8x8-and-8x12-hoop","title":"KY State Applique Embroidery with Kentucky Script Overlap Zigzag Stitch Three Sizes for 6x10, 8x8, and 8x12 Hoop","description":"\u003cp\u003eThis unique Kentucky KY state zigzag applique embroidery design is sure to become a favorite! An applique embroidery design featuring one layer of fabric with a zigzag finishing stitch. Overlapping the state applique, is \"Kentucky\" in a modern script font.\u003c\/p\u003e\n\u003cp\u003eThis listing comes with three sizes to fit:\u003c\/p\u003e\n\u003cp\u003e8x8 hoop - 3 11\/16 x 7 13\/16 inches with 6,441 stitches\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 4 13\/16 x 10 3\/16 inches with 8,234 stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 5 7\/16 x 11 5\/8 inches with 9,324 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616559894744,"sku":"10673","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYStateAngledScript.jpg?v=1678206267"},{"product_id":"ky-applique-embroidery-cutout-patch-zigzag-stitch-two-sizes-for-6x10-hoop-and-8x12-hoop-kentucky","title":"KY Applique Embroidery Cutout Patch Zigzag Stitch Two Sizes for 6x10 Hoop and 8x12 Hoop Kentucky","description":"\u003cp\u003eShow your Kentucky state spirit with this cute KY block font zigzag applique design!! This is a unique design that's an applique patch with the letters cutout of the applique fabric and the background item showing through.\u003c\/p\u003e\n\u003cp\u003eListing comes with two sizes to fit:\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 6 5\/16 x 8 13\/16 inches with 4,334 stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 7 3\/4 x 10 15\/16 inches with 5,333 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616559960280,"sku":"10647","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYCutoutSquare.jpg?v=1679493874"},{"product_id":"ky-applique-embroidery-kentucky-chunky-block-machine-embroidery-sizes-8x8-6x10-and-8x12-each-with-bean-raggy-stitch-and-zigzag-stitch","title":"KY Applique Embroidery Kentucky Chunky Block Machine Embroidery Sizes 8x8, 6x10, and 8x12 Each With Bean (raggy) Stitch and Zigzag Stitch","description":"\u003cp\u003eShow your Kentucky state spirit with this chunky applique embroidery font!! This design comes with three sizes, each with two different edge stitch options: zigzag and raggy (bean) stitch.\u003c\/p\u003e\n\u003cp\u003eAlso, let me know if you'd like this design for a different state!\u003c\/p\u003e\n\u003cp\u003eListing comes in three sizes to fit:\u003c\/p\u003e\n\u003cp\u003eRaggy:\u003cbr\u003e8x8 hoop - 5 1\/4 x 7 13\/16 inches with 2,248 Stitches\u003cbr\u003e6x10 hoop - 6 3\/16 x 9 1\/4 inches with 2,633 Stitches\u003cbr\u003e8x12 hoop - 7 11\/16 x 11 7\/16 inches with 3,288 Stitches\u003cbr\u003e\u003cbr\u003eZigZag:\u003cbr\u003e8x8 hoop - 5 5\/16 x 7 7\/8 inches with 2,525 Stitches\u003cbr\u003e6x10 hoop - 6 3\/16 x 9 1\/4 inches with 2,978 Stitches\u003cbr\u003e8x12 hoop - 7 3\/4 x 11 9\/16 inches with 3,701 Stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616561303768,"sku":"10653","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYChunkyBlock.jpg?v=1677252651"},{"product_id":"ky-applique-embroidery-double-bean-stitch-with-kentucky-satin-stitch-script-overlap-three-sizes-6x10-8x8-and-8x12-hoop","title":"KY Applique Embroidery Double Bean Stitch with Kentucky Satin Stitch Script Overlap Three Sizes 6x10, 8x8, and 8x12 Hoop","description":"\u003cp\u003eShow your Kentucky state spirit with this cute applique embroidery design with a double bean stitch raggy edge KY applique and \"kentucky\" in a trendy script overlapping the applique!!\u003c\/p\u003e\n\u003cp\u003eThis listing comes in three sizes to fit:\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 6 3\/16 x 7 7\/16 inches with 12,225 stitches\u003c\/p\u003e\n\u003cp\u003e8x8 hoop - 6 1\/2 x 7 13\/16 inches with 12,799 stiches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 7 13\/16 x 9 3\/8 inches with 15,305 stitches \u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616561369304,"sku":"10649","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYKentuckyScript.jpg?v=1678212051"},{"product_id":"ky-applique-embroidery-kentucky-3d-effect-zigzag-stitch-two-sizes-to-fit-8x12-hoop-and-8x8-or-6x10-hoop","title":"KY Applique Embroidery Kentucky 3D Effect Zigzag Stitch Two Sizes to fit 8x12 Hoop and 8x8 or 6x10 Hoop","description":"\u003cp\u003eShow your Kentucky state spirit with this unique applique embroidery design that has a 3D effect zigzag stitch!\u003c\/p\u003e\n\u003cp\u003eAn applique embroidery design featuring one layer of fabric with a zigzag finishing stitch. This design does not use embroidery puff foam, so is not a true 3D design. It simply has top-stitching that gives the effect of a 3D letter.\u003c\/p\u003e\n\u003cp\u003eListing includes two sizes that will fit:\u003cbr\u003e8x8\/6x10 hoop - 6 3\/16 x 7 7\/8 inches with 6,272 Stitches\u003cbr\u003e8x12 hoop - 7 5\/8 x 9 3\/4 inches with 7,631 Stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616561402072,"sku":"10650","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KY3DEffectHoratioDBold.jpg?v=1677083082"},{"product_id":"kentucky-arched-varsity-applique-embroidery-zigzag-stitch-8x12-hoop","title":"KENTUCKY Arched Varsity Applique Embroidery Zigzag Stitch 8x12 Hoop","description":"\u003cp\u003eShow your Kentucky state pride with this cute applique embroidery design featuring a quick-stitching zigzag edge.\u003c\/p\u003e\n\u003cp\u003eOverall size to fit:\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 4 3\/8 x 11 13\/16 inches with 6,957 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616561959128,"sku":"10599","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KentuckyArchedVarsity_dd099c18-6a3a-4743-ba2c-d3b67506d27f.jpg?v=1673373585"},{"product_id":"pennsylvania-applique-embroidery-with-script-satin-stitch-overlap-design-full-chest-8x12-hoop-pa-zigzag-stitch","title":"Pennsylvania Applique Embroidery with Script Satin Stitch Overlap Design Full Chest 8x8, 6x10, and 8x12 Hoop PA Zigzag Stitch","description":"\u003cp\u003eShow your Pennsylvania PA state spirit with this cute applique embroidery design!!\u003c\/p\u003e\n\u003cp\u003eAn embroidery design featuring one layer of fabric with a zigzag finishing stitch and a satin stitch script overlapping the applique.\u003c\/p\u003e\n\u003cp\u003eOverall size is 195mm tall x 293mm wide, to fit:\u003c\/p\u003e\n\u003cp\u003e8x8 hoop - 5 7\/8 x 7 13\/16 inches with 7,912 Stitches\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 6 1\/4 x 9 3\/8 inches with 11,741 Stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 7 11\/16 x 11 9\/16 inches with 14,403 Stitches\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616565235928,"sku":"11046","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/PennsylvaniaStatewScript.jpg?v=1677172698"},{"product_id":"ky-state-applique-embroidery-with-kentucky-script-overlap-zigzag-stitch-three-sizes-for-8x8-6x10-and-8x12-hoops","title":"KY State Applique Embroidery with Kentucky Script Overlap Zigzag Stitch Four Sizes for 5x7, 8x8, 6x10, and 8x12 hoops","description":"\u003cp\u003eThis zigzag applique embroidery design of the state of Kentucky with a modern satin stitch script overlap stitches beautifully!\u003c\/p\u003e\n\u003cp\u003eThis listing comes with four sizes which will fit:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e5x7 hoop - 4 1\/16 x 7 1\/16 inches with 9,007 stitches                                                        8x8 hoop - 4 1\/2 x 7 3\/4 inches with 9,936 stitches\u003cbr\u003e6x10 hoop - 5 11\/16 x 9 15\/16 inches with 13,052 stitches\u003cbr\u003e8x12 hoop - 6 11\/16 x 11 5\/8 inches with 14,695 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616566317272,"sku":"10674","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KentuckyStateOverlapScript.jpg?v=1679494902"},{"product_id":"kentucky-lower-case-applique-embroidery-raggy-and-zigzag-stitch-8x12-hoop","title":"KENTUCKY Lower Case Applique Embroidery Raggy and Zigzag Stitch 8x12 Hoop","description":"\u003cp\u003eShow your Kentucky spirit with this cute applique embroidery design featuring a quick-stitching raggy or zigzag edge.\u003c\/p\u003e\n\u003cp\u003eOverall size to fit:\u003cbr\u003eRaggy:\u003cbr\u003e8x12 hoop - 3 13\/16 x 11 1\/2 inches with 4,221 Stitches\u003cbr\u003e\u003cbr\u003eZigZag\u003cbr\u003e8x12 hoop - 3 15\/16 x 11 5\/8 inches with 6,413 Stitches \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616569626840,"sku":"10616","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/Kentuckylowercase.jpg?v=1675446472"},{"product_id":"local-tennessee-tn-state-raggy-applique-machine-embroidery-design","title":"LOCAL Tennessee TN State Raggy Applique Machine Embroidery Design","description":"\u003cp\u003eShow your Tennessee state pride!! Full-chest size LOCAL Tennessee State design in the popular raggy applique style! The second picture shows the state of Kentucky in the design, but you are purchasing the state of Tennessee.\u003c\/p\u003e\n\u003cp\u003eAn applique embroidery design featuring one layer of fabric with a raggy edge bean finishing stitch. Overall size:\u003c\/p\u003e\n\u003cp\u003e4 1\/2 x 9 15\/16 inches with 5,313 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616569823448,"sku":"10719","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/TNLocalState.jpg?v=1679330087"},{"product_id":"kansas-applique-embroidered-script-ks-design-full-chest-8x12-hoop","title":"Kansas Applique Embroidered Script KS Design Full Chest 8x12 Hoop","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eShow your Kansas state spirit with this cute embroidery design!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis listing includes four sizes:\u003cbr data-mce-fragment=\"1\"\u003e5x7 hoop - 4 1\/16 x 7 1\/16 inches with 8,454 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 hoop - 4 9\/16 x 7 7\/8 inches with 9,376 stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 hoop - 5 7\/8 x 10 3\/16 inches with 12,673 stitches\u003cbr data-mce-fragment=\"1\"\u003e7x12 hoop - 6 3\/4 x 11 13\/16 inches with 16,530 stitches\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616574312664,"sku":"10591","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KansasStatewScript.jpg?v=1677169436"},{"product_id":"missouri-state-zigzag-applique-with-script-overlap-machine-embroidery-design-8x12-hoop-mo","title":"Missouri State Zigzag Applique with Script Overlap Machine Embroidery Design 8x12 Hoop MO","description":"\u003cp\u003eWhere are my Missouri lovers? Show your love of your state with this cute design! It comes in one size with a zigzag finishing stitch and an overlapping script in a satin stitch.\u003c\/p\u003e\n\u003cp\u003eOverall size is 7 9\/16 x 11 5\/8 inches with 12,618 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616578244824,"sku":"10881","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/MissouriStatewScript.jpg?v=1677095838"},{"product_id":"indiana-state-zigzag-applique-with-script-overlap-machine-embroidery-design-8x12-hoop-in","title":"Indiana State Zigzag Applique with Script Overlap Machine Embroidery Design 8x12 Hoop IN","description":"\u003cp\u003eAre you an Indiana fan? Show your love of your state with this cute design! It comes in one size with a zigzag finishing stitch and an overlapping script in a satin stitch.\u003c\/p\u003e\n\u003cp\u003eOverall size to fit:\u003cbr\u003e8x12 hoop - 7 3\/4 x 11 inches with 11,134 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616578310360,"sku":"10547","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/IndianaStateScript.jpg?v=1675443854"},{"product_id":"kentucky-split-state-applique-embroidery-design-july-4th-ky-8x12-hoop","title":"Kentucky Split State Applique Embroidery Design July 4th KY 8x12 Hoop","description":"\u003cp\u003eShow your American spirit and Kentucky state pride with this cute applique design! An applique embroidery design featuring two layers of fabric with a zigzag finishing stitch. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOverall size to fit:\u003cbr\u003e8x12 hoop - 5 9\/16 x 11 9\/16 inches with 2,707 Stitches \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":42616585388248,"sku":"10628","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYSplitStateZZ_75b73cb5-8b21-4150-8c55-4f1bdbc94595.jpg?v=1675822797"},{"product_id":"joy-kentucky-gnome-applique-machine-embroidery-design-zigzag-edge-stitch-four-sizes-5x7-8x8-6x10-8x12-hoop","title":"Joy Kentucky Gnome Applique Machine Embroidery Design ZigZag Edge Stitch Four Sizes 5x7, 8x8, 6x10, 8x12 Hoop","description":"\u003cp\u003eThis cute Kentucky gnome applique embroidery design is sure to bring you lots of Christmas JOY! This design has a quick-stitching zigzag edge.\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes to fit:\u003c\/p\u003e\n\u003cp\u003e5x7 hoop - 4 1\/4 x 7 1\/16 inches with 3,715 stitches\u003c\/p\u003e\n\u003cp\u003e8x8 hoop - \u003cspan data-mce-fragment=\"1\"\u003e4 1\/4 x 7 1\/16 inches with 3,715 stitches\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 6 1\/8 x 10 3\/16 inches with 5,106 stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 7 1\/16 x 11 3\/4 inches with 5,799 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u2028\u003cbr\u003e 5x7 (130mm x 180mm)\u2028\u003cbr\u003e 6x10 (160mm x 260mm)\u2028\u003cbr\u003e 8x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030262488,"sku":"10585","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/JOYKYGnomeZZApp.jpg?v=1679941596"},{"product_id":"kentucky-zigzag-applique-embroidery-design-shaped-like-the-state-of-ky-four-sizes-5x7-8x8-6x10-8x12-hoop","title":"KENTUCKY Zigzag Applique Embroidery Design Shaped Like the State of KY Four Sizes 5x7, 8x8, 6x10, 8x12 Hoop","description":"\u003cp\u003eShow your Kentucky spirit with this cute applique embroidery design featuring a quick-stitching zigzag edge.\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes to fit:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e5x7 hoop - 3 1\/2 x 7 1\/16 inches with 4,469 Stitches\u003cbr\u003e8x8 hoop - 3 7\/8 x 7 7\/8 inches with 4,972 Stitches\u003cbr\u003e6x10 hoop - 5 1\/16 x 10 1\/4 inches with 6,357 Stitches\u003cbr\u003e8x12 hoop - 5 3\/4 x 11 5\/8 inches with 7,065 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u2028\u003cbr\u003e 5x7 (130mm x 180mm)\u2028\u003cbr\u003e 6x10 (160mm x 260mm)\u2028\u003cbr\u003e 8x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030295256,"sku":"10634","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KentuckyStateShapeApp.jpg?v=1672855871"},{"product_id":"ga-georgia-state-applique-zigzag-stitch-with-script-overlap-embroidery-design-four-sizes-5x7-6x10-7x12-and-8x12-hoop","title":"GA Georgia State Applique ZigZag Stitch with Script Overlap Embroidery Design Four Sizes 5x7, 6x10, 7x12, and 8x12 Hoop","description":"\u003cp\u003eShow your Georgia state spirit with this cute applique design with a zigzag edge state and embroidered \"georgia\" overlapping the applique in a split-stitch satin script!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis listing comes in four sizes:\u003cbr data-mce-fragment=\"1\"\u003e5x7 hoop - 5 1\/8 x 6 3\/8 inches with 8,617 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 or 6x10 hoop - 6 5\/16 x 7 7\/8 inches with 10,719 stitches\u003cbr data-mce-fragment=\"1\"\u003e7x12 hoop - 7 1\/16 x 8 7\/8 inches with 10,719 stitches\u003cbr data-mce-fragment=\"1\"\u003e8x12 hoop - 7 3\/4 x 9 3\/4 inches with 15,476 Stitches\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526030655704,"sku":"10384","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/GeorgiaStateOverlap.jpg?v=1675269097"},{"product_id":"alabama-arched-satin-applique-embroidery-design-three-sizes-8x8-6x10-8x12-hoop","title":"Alabama Arched Satin Applique Embroidery Design Three Sizes 8x8, 6x10, 8x12 Hoop","description":"\u003cp\u003eWhere are the Alabama fans? You're going to love this beautiful Alabama arched satin applique embroidery! Leave out the fabric for an outline design!\u003c\/p\u003e\n\u003cp\u003eThis listing includes three sizes to fit:\u003cbr\u003e\u003cbr\u003e8x8 hoop - 5 1\/8 x 7 13\/16, 20,662 Stitches\u003cbr\u003e6x10 hoop - 5 5\/16 x 10 1\/8, 25,156 Stitches\u003cbr\u003e8x12 hoop - 7 5\/8 x 11 11\/16, 30,494 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003cbr\u003e \u003cbr\u003e Available in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003cbr\u003e \u003cbr\u003e This design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u003c\/p\u003e\n\u003cp\u003e\u2028This is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003cbr\u003e \u003cbr\u003e Where hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u2028\u003cbr\u003e 5x7 (130mm x 180mm)\u2028\u003cbr\u003e 6x10 (160mm x 260mm)\u2028\u003cbr\u003e 8x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e APPLIQUÉ INSTRUCTIONS:\u003cbr\u003e \u003cbr\u003e Fabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.  Do not apply heat n bond lite for raggy edge applique.\u003cbr\u003e \u003cbr\u003e Appliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003cbr\u003e \u003cbr\u003e Step 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003cbr\u003e \u003cbr\u003e Step 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.  For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using.  Flannel frays very easily and adds more dimension to the raggy edge.\u003cbr\u003e \u003cbr\u003e Step 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches.  Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003cbr\u003e \u003cbr\u003e For designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003cbr\u003e \u003cbr\u003e Happy Stitching!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526031605976,"sku":"10016","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/files\/AlabamaArchedSatin.jpg?v=1729794907"},{"product_id":"ky-state-applique-embroidery-with-satin-stitch-seven-sizes-4in-5in-6in-7in-8in-10in-12in","title":"KY State Applique Embroidery with Satin Stitch Seven Sizes 4in, 5in, 6in, 7in, 8in, 10in, 12in.","description":"\u003cp\u003eThis satin stitch applique embroidery design of the state of Kentucky is perfect for Kentuckians everywhere!\u003c\/p\u003e\n\u003cp\u003eThis listing includes seven sizes:\u003cbr\u003e4 inches wide - 1 7\/8 x 3 15\/16 inches with 2,137 Stitches\u003cbr\u003e5 inches wide - 2 3\/8 x 5 1\/16 inches with 2,778 Stitches\u003cbr\u003e6 inches wide - 2 15\/16 x 6 3\/16 inches with 3,517 Stitches\u003cbr\u003e7 inches wide - 3 1\/4 x 6 7\/8 inches with 3,862 Stitches\u003cbr\u003e8 inches wide - 3 11\/16 x 7 7\/8 inches with 4,434 Stitches\u003cbr\u003e10 inches wide - 4 3\/4 x 10 3\/16 inches with 5,303 Stitches\u003cbr\u003e12 inches wide - 5 1\/2 x 11 3\/4 inches with 6,006 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u2028\u003cbr\u003e 5x7 (130mm x 180mm)\u2028\u003cbr\u003e 6x10 (160mm x 260mm)\u2028\u003cbr\u003e 8x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526032163032,"sku":"10675","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/il_fullxfull.4369110210_mcr1_87bef992-dd31-46a6-9d54-47f9b1901219.jpg?v=1669369702"},{"product_id":"kentucky-pumpkin-applique-machine-embroidery-design-satin-and-zigzag-edge-8x12-hoop-ky","title":"Kentucky Pumpkin Applique Machine Embroidery Design Satin and Zigzag Edge 8x12 Hoop KY","description":"\u003cp\u003eHey all you Kentuckians, who's ready for FALL? Show your love of cooler temps and beautiful autumn colors with this cute pumpkin design! It comes in one size with a satin or zigzag edge stitch.\u003c\/p\u003e\n\u003cp\u003eYou are purchasing an embroidery design which must be stitched using an embroidery machine. This is not a patch!\u003c\/p\u003e\n\u003cp\u003eOverall size to fit:\u003cbr\u003e\u003cbr\u003eSatin:\u003cbr\u003e8x12 hoop - 6 3\/16 x 11 1\/4 inches with 8,457 stitches\u003cbr\u003e\u003cbr\u003eZigZag:\u003cbr\u003e8x12 hoop - 6 3\/16 x 11 1\/4 inches with 3,797 stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526039568600,"sku":"10620","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KentuckyPumpkinSatin_3ae96279-3d68-468a-adc5-b60856a9bba6.jpg?v=1677603159"},{"product_id":"tennessee-arched-applique-embroidery-satin-stitch-four-sizes-5x7-8x8-6x10-and-8x12-hoop","title":"Tennessee Arched Applique Embroidery Satin Stitch Four Sizes 5x7, 8x8, 6x10, and 8x12 Hoop","description":"\u003cp\u003eCute, unique Tennessee arched applique embroidery design with a satin stitch edge. You can omit the fabric for a completely different look!\u003c\/p\u003e\n\u003cp\u003eThis listing comes with three sizes to fit:\u003cbr data-mce-fragment=\"1\"\u003e5x7 hoop - 4 3\/4 x 7 1\/16 inches with 20,008 Stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 hoop - 5 1\/4 x 7 7\/8 inches with 22,307 Stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 hoop - 6 1\/4 x 10 1\/8 inches with 26,347 Stitches\u003cbr data-mce-fragment=\"1\"\u003e8x12 hoop - 7 13\/16 x 11 3\/4 inches with 32,886 Stitches\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u20284x4 (100mm x 100mm)\u20285x7 (130mm x 180mm)\u20286x10 (160mm x 260mm)\u20288x8 (200mm x 200mm)\u20287x12 (180mm x 300mm)\u20288x12 (200mm x 300mm)\u20289.5x14 (240mm x 360mm)\u202810.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526041534680,"sku":"11243","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/il_fullxfull.4288801390_airg_f427f0ac-994d-433d-9a23-496562c55f95.jpg?v=1669370703"},{"product_id":"ky-applique-embroidery-with-basketball-5x7-8x8-6x10-8x12-zigzag-edge-stitch-quick-stitch-kentucky","title":"KY with Basketball Applique Embroidery 5x7, 8x8, 6x10, and 8x12 Zigzag Edge Stitch Quick Stitch Kentucky","description":"\u003cp\u003eShow your love of Kentucky basketball with this cute applique embroidery design available in a zigzag edge stitch for a quick project.\u003c\/p\u003e\n\u003cp\u003eAn applique embroidery design featuring two fabrics. Overall size is 7 ¾\" tall x 11 ⅝\" wide to fit:\u003cbr\u003e5x7 hoop - 4 3\/4 x 7 1\/16 inches with 4,691 stitches\u003cbr\u003e8x8 hoop - 5 1\/4 x 7 13\/16 inches with 5,196 stitches\u003cbr\u003e6x10 hoop - 6 5\/16 x 9 3\/8 inches with 6,201 stitches\u003cbr\u003e8x12 hoop - 7 3\/4 x 11 9\/16 inches with 7,644 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526042386648,"sku":"10678","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYChunkyBasketball.jpg?v=1678120718"},{"product_id":"tn-tennessee-football-applique-embroidery-zigzag-stitch-four-sizes-5x7-8x8-6x10-and-8x12-hoop","title":"TN Tennessee Football Applique Embroidery Zigzag Stitch Four Sizes 5x7, 8x8, 6x10, and 8x12 Hoop","description":"\u003cp\u003eCute, unique Tennessee TN applique embroidery design with a football through the letters. Quick-stitching zigzag edge.\u003c\/p\u003e\n\u003cp\u003eThis listing comes with four sizes to fit:\u003cbr\u003e5x7 hoop - 4 3\/4 x 7 inches with 3,943 Stitches\u003cbr\u003e8x8 hoop - 5 3\/8 x 7 13\/16 inches with 4,404 Stitches\u003cbr\u003e6x10 hoop - 6 5\/16 x 9 1\/4 inches with 5,093 Stitches\u003cbr\u003e8x12 hoop - 7 11\/16 x 11 1\/4 inches with 6,157 Stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526042550488,"sku":"11288","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/TNFootball.jpg?v=1677086131"},{"product_id":"applique-embroidery-ky-with-football-zigzag-edge-stitch-quick-stitch-kentucky-four-sizes-5x7-6x10-8x8-8x12-hoop","title":"KY with Football Applique Embroidery Zigzag Edge Stitch Quick Stitch Kentucky Four Sizes 5x7, 6x10, 8x8, 8x12 Hoop","description":"\u003cp\u003eShow your love of Kentucky football with this cute applique embroidery design available in a zigzag edge stitch for a quick project.\u003c\/p\u003e\n\u003cp\u003eThis listing includes 4 sizes to fit:\u003cbr\u003e\u003cbr\u003e5x7 hoop - 4 11\/16 x 7 inches with 3,799 Stitches\u003cbr\u003e8x8 hoop - 5 1\/4 x 7 13\/16 inches with 4,186 Stitches\u003cbr\u003e6x10 hoop - 6 1\/4 x 9 5\/16 inches with 4,932 Stitches\u003cbr\u003e8x12 hoop - 7 13\/16 x 11 5\/8 inches with 6,089 Stitches \u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003cbr\u003e\u003cbr\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003cbr\u003e\u003cbr\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003cbr\u003e\u003cbr\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003cbr\u003e\u003cbr\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAPPLIQUÉ INSTRUCTIONS:\u003cbr\u003e\u003cbr\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003cbr\u003e\u003cbr\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003cbr\u003e\u003cbr\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003cbr\u003e\u003cbr\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003cbr\u003e\u003cbr\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003cbr\u003e\u003cbr\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003cbr\u003e\u003cbr\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526042714328,"sku":"10679","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYFootball.jpg?v=1672689664"},{"product_id":"illinois-arched-applique-embroidery-satin-stitch-four-sizes-5x7-8x8-6x10-8x12-hoop","title":"Illinois Arched Applique Embroidery Satin Stitch Four Sizes 5x7, 8x8, 6x10, 8x12 Hoop","description":"\u003cp\u003eThis is a classic collegiate arched applique embroidery design with a satin stitch edge. You can omit the fabric for a completely different look.\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes to fit:\u003cbr\u003e5x7 hoop - 4 11\/16 x 7 1\/16 inches with 17,055 Stitches\u003cbr\u003e8x8 hoop - 5 1\/4 x 7 13\/16 inches with 19,106 Stitches\u003cbr\u003e6x10 hoop - 6 5\/16 x 10 1\/8 inches with 22,936 Stitches\u003cbr\u003e8x12 hoop - 7 13\/16 x 11 3\/4 inches with 28,274 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u20284x4 (100mm x 100mm)\u20285x7 (130mm x 180mm)\u20286x10 (160mm x 260mm)\u20288x8 (200mm x 200mm)\u20287x12 (180mm x 300mm)\u20288x12 (200mm x 300mm)\u20289.5x14 (240mm x 360mm)\u202810.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526046187736,"sku":"10537","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/files\/IllinoisArchedSatin.jpg?v=1730296068"},{"product_id":"applique-embroidery-split-k-in-satin-edge-uk-university-of-kentucky-state-ky-seven-sizes-4-5-6-7-8-9-and-10-inches-high","title":"Split K Applique Embroidery in Satin Edge UK University of Kentucky State KY Seven Sizes 4, 5, 6, 7, 8, 9, and 10 inches high","description":"\u003cp\u003eShow your Kentucky spirit with this split K satin stitch applique embroidery design!!\u003c\/p\u003e\n\u003cp\u003eThis listing includes seven sizes:\u003cbr\u003e4 inches - 3 3\/4 x 3 15\/16 inches with 9,130 stitches\u003cbr\u003e5 inches - 5 1\/8 x 5 3\/8 inches with 12,213 stitches\u003cbr\u003e6 inches - 6 1\/4 x 6 5\/8 inches with 15,298 stitches\u003cbr\u003e7 inches - 7 1\/16 x 7 1\/2 inches with 17,170 stitches\u003cbr\u003e8 inches - 7 7\/16 x 7 7\/8 inches with 17,989 stitches\u003cbr\u003e9 inches - 8 x 8 7\/16 inches with 19,299 stitches\u003cbr\u003e10 inches - 9 3\/16 x 9 13\/16 inches with 22,431 stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u003cbr\u003e \u20285x7 (130mm x 180mm)\u003cbr\u003e \u20286x10 (160mm x 260mm)\u2028\u003cbr\u003e 8x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526046908632,"sku":"11194","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/SplitKKentucky.jpg?v=1679499997"},{"product_id":"applique-tn-zigzag-stitch-two-color-embroidery-design-tennessee-8x12-hoop","title":"TN Applique Zigzag Stitch Two Color Embroidery Design Tennessee 8x12 Hoop","description":"\u003cp\u003eShow your Tennessee state pride!!\u003c\/p\u003e\n\u003cp\u003eAn applique embroidery design featuring two different fabrics with a zigzag finishing stitch. Overall size is 7.5\" tall x 10.75\" wide. Sized to fit:\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 7 9\/16 x 10 3\/4 inches with 4,067 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526047006936,"sku":"11282","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/TNSplitZZ.jpg?v=1678115079"},{"product_id":"tennessee-applique-embroidery-tn-raggy-satin-and-zigzag-stitch-state-as-crossbar-8x12-hoop","title":"TN Tennessee Applique Embroidery State Raggy, Satin, and ZigZag Stitch Five Sizes 5x7, 8x8, 6x10, 7x12, 8x12 Hoop","description":"\u003cp\u003eHow cute is this TN applique embroidery design, with the state in place of the crossbar on the T!! This design comes with three edge stitches--raggy, satin, or zigzag--each in five sizes for a total of 15 designs!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis listing includes five sizes:\u003cbr data-mce-fragment=\"1\"\u003eRaggy:\u003cbr data-mce-fragment=\"1\"\u003e5x7 - 4 9\/16 x 7 1\/16 inches with 2,718 Stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 - 5 ⅛ x 7 7\/8 inches with 2,776 Stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 - 6 1\/4 x 9 11\/16 inches with 3,594 Stitches\u003cbr data-mce-fragment=\"1\"\u003e7x12 - 7 1\/16 x 10 7\/8 inches with 4,002 Stitches\u003cbr data-mce-fragment=\"1\"\u003e8x12 - 7 9\/16 x 11 11\/16 inches with 4,266 Stitches\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSatin:\u003cbr data-mce-fragment=\"1\"\u003e5x7 - 4 5\/8 x 7 1\/16 inches with 8,454 Stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 - 5 ⅛ x 7 13\/16 inches with 9,361 Stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 - 6 5\/16 x 9 5\/8 inches with 11,413 Stitches\u003cbr data-mce-fragment=\"1\"\u003e7x12 - 7 1\/16 x 10 13\/16 inches with 12,692 Stitches\u003cbr data-mce-fragment=\"1\"\u003e8x12 - 7 11\/16 x 11 13\/16 inches with 13,789 Stitches\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eZigZag:\u003cbr data-mce-fragment=\"1\"\u003e5x7 - 4 5\/8 x 7 1\/16 inches with 2,822 Stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 - 5 ⅛ x 7 7\/8 inches with 3,131 Stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 - 6 5\/16 x 9 5\/8 inches with 3,775 Stitches\u003cbr data-mce-fragment=\"1\"\u003e7x12 - 7 1\/16 x 10 13\/16 inches with 4,196 Stitches\u003cbr data-mce-fragment=\"1\"\u003e8x12 - 7 11\/16 x 11 13\/16 inches with 4,535 Stitches\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr data-mce-fragment=\"1\"\u003eHat (60mm x 130mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e4x4 (100mm x 100mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e5x7 (130mm x 180mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e6x10 (160mm x 260mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e8x8 (200mm x 200mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e7x12 (180mm x 300mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e8x12 (200mm x 300mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e10.5x16 (272mmx460mm)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAPPLIQUÉ INSTRUCTIONS:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526047072472,"sku":"11285","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/tncrossbarsatin.jpg?v=1673375093"},{"product_id":"ky-applique-embroidery-kentucky-blanket-stitch-six-sizes-for-4x4-5x7-8x8-6x10-8x12-and-hat-hoop","title":"KY Applique Embroidery Kentucky Blanket Stitch Six Sizes for 4x4, 5x7, 8x8, 6x10, 8x12, and Hat Hoop","description":"\u003cp\u003eShow your Kentucky state spirit with this cute KY academic font applique embroidery design!! It has a blanket edge stitch for a vintage look!\u003c\/p\u003e\n\u003cp\u003eThis listing includes six sizes to fit:\u003cbr\u003e4x4 hoop - 2 9\/16 x 3 15\/16 inches with 1,220 Stitches\u003cbr\u003e5x7 hoop - 4 11\/16 x 7 1\/16 inches with 1,866 Stitches\u003cbr\u003e6x10 hoop - 6 1\/4 x 9 1\/2 inches with 2,491 Stitches \u003cbr\u003e8x8 hoop - 5 3\/16 x 7 13\/16 inches with 2,064 Stitches\u003cbr\u003e8x12 hoop - 7 11\/16 x 11 5\/8 inches with 3,071 Stitches\u003cbr\u003e60mm hat hoop - 2 5\/16 x 3 9\/16 inches with 1,097 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copywrite laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u20284x4 (100mm x 100mm)\u20285x7 (130mm x 180mm)\u20286x10 (160mm x 260mm)\u20288x8 (200mm x 200mm)\u20287x12 (180mm x 300mm)\u20288x12 (200mm x 300mm)\u20289.5x14 (240mm x 360mm)\u202810.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend adding a layer of flannel to raggy applique as it frays very well and adds depth and dimension to you raggy applique.\u003c\/p\u003e\n\u003cp\u003eDO NOT CHANGE THREAD COLORS. Appliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch (if using flannel, lay both pieces together over the placement stitch). This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: For raggy edge applique, do not trim the fabric until after the design is finished, unless there are multiple fabric pieces and you need to trim prior to another step stitching on top of it. Run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526047695064,"sku":"10652","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYOutrightBlanket8x12.jpg?v=1673297919"},{"product_id":"arkansas-applique-embroidery-with-two-layers-zigzag-stitch-design-four-sizes-5x7-8x8-6x10-8x12-hoops","title":"Arkansas Applique Embroidery with Two Layers Zigzag Stitch Design Four Sizes 5x7, 8x8, 6x10, 8x12 Hoops","description":"\u003cp\u003eShow your Arkansas state spirit with this zigzag applique embroidery design!!\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes to fit:\u003cbr\u003e5x7 hoop - 3 3\/4 x 7 1\/16 inches with 6,458 Stitches\u003cbr\u003e8x8 hoop - 4 3\/16 x 7 7\/8 inches with 7,065 Stitches\u003cbr\u003e6x10 hoop - 5 7\/16 x 10 1\/4 inches with 8,764 Stitches\u003cbr\u003e8x12 hoop - 6 1\/4 x 11 13\/16 inches with 9,985 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u20284x4 (100mm x 100mm)\u20285x7 (130mm x 180mm)\u20286x10 (160mm x 260mm)\u20288x8 (200mm x 200mm)\u20287x12 (180mm x 300mm)\u20288x12 (200mm x 300mm)\u20289.5x14 (240mm x 360mm)\u202810.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526050676952,"sku":"10028","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/ArkansasTwoLayerTrawll.jpg?v=1675362718"},{"product_id":"applique-embroidery-cards-script-zigzag-design-machine-embroidery-8x12-hoop","title":"Cards Script Applique Embroidery Design ZigZag Edge Machine Embroidery 8x12 Hoop","description":"\u003cp\u003eShow your school spirit and Louisville Cardinal pride!!\u003c\/p\u003e\n\u003cp\u003eAn applique embroidery design with one layer of fabric and a zig zag finishing stitch. It is 6\" tall x 11.5\" wide. This listing is one size to fit:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e8x12 hoop - 6 x 11 9\/16,  4,593 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003cbr\u003e \u003cbr\u003e Available in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003cbr\u003e \u003cbr\u003e This design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u003c\/p\u003e\n\u003cp\u003e\u2028This is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003cbr\u003e \u003cbr\u003e Where hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u2028\u003cbr\u003e 5x7 (130mm x 180mm)\u2028\u003cbr\u003e 6x10 (160mm x 260mm)\u2028\u003cbr\u003e 8x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e APPLIQUÉ INSTRUCTIONS:\u003cbr\u003e \u003cbr\u003e Fabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.  Do not apply heat n bond lite for raggy edge applique.\u003cbr\u003e \u003cbr\u003e Appliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003cbr\u003e \u003cbr\u003e Step 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003cbr\u003e \u003cbr\u003e Step 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.  For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using.  Flannel frays very easily and adds more dimension to the raggy edge.\u003cbr\u003e \u003cbr\u003e Step 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches.  Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003cbr\u003e \u003cbr\u003e For designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003cbr\u003e \u003cbr\u003e Happy Stitching!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526054478040,"sku":"10177","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/CardsScript_dc90bb45-6550-4973-83d9-45207f4ef9e8.jpg?v=1672682087"},{"product_id":"applique-embroidery-corbin-script-design-machine-embroidery-zigzag-edge-four-sizes-5x7-6x10-8x8-8x12-hoop-kentucky","title":"Corbin Script Applique Embroidery Design Machine Embroidery ZigZag Edge Four Sizes 5x7, 6x10, 8x8, 8x12 Hoop Kentucky","description":"\u003cp\u003eShow your love of the city or Corbin with this cute applique embroidery design with a quick-stitching zigzag edge!!\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes:\u003cbr\u003e5x7 hoop - 3 1\/16 x 7 1\/16 inches with 3,875 stitches\u003cbr\u003e8x8 hoop - 3 ⅜ x 7 ⅞ inches with 4,253 stitches\u003cbr\u003e6x10 hoop - 4 ⅜ x 10 3\/16 inches with 5,414 stitches\u003cbr\u003e8x12 hoop - 5 1\/16 x 11 ¾ inches with 6,139 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003cbr\u003e\u003cbr\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003cbr\u003e\u003cbr\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u003c\/p\u003e\n\u003cp\u003e\u2028This is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003cbr\u003e\u003cbr\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAPPLIQUÉ INSTRUCTIONS:\u003cbr\u003e\u003cbr\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.  Do not apply heat n bond lite for raggy edge applique.\u003cbr\u003e\u003cbr\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003cbr\u003e\u003cbr\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003cbr\u003e\u003cbr\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.  For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using.  Flannel frays very easily and adds more dimension to the raggy edge.\u003cbr\u003e\u003cbr\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches.  Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003cbr\u003e\u003cbr\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003cbr\u003e\u003cbr\u003eHappy Stitching!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526058410200,"sku":"10242","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/corbinwm.jpg?v=1670356147"},{"product_id":"ky-kentucky-applique-two-fabric-zigzag-stitch-embroidery-design-kentucky-uk-university-of-kentucky-embroidered-8x12-hoop","title":"KY Two Fabric Applique ZigZag Stitch Embroidery Design Kentucky, U of K, Nine Sizes: Hat, 4x4, 5x5, 6x6, 5x7, 8x8, 6x10, 7x12, and 8x12 Hoop","description":"\u003cp\u003eShow your Kentucky state pride and school spirit!! This design features two different fabrics and a zigzag finishing stitch.\u003cbr\u003e\u003cbr\u003eNine sizes to fit:\u003cbr\u003eHat - 2 3\/8 x 3 5\/16 inches with 1,481 stitches\u003cbr\u003e4x4 hoop - 2 3\/4 x 3 15\/16 inches with 1,711 stitches\u003cbr\u003e5x5 hoop - 3 1\/2 x 4 7\/8 inches with 2,075 stitches\u003cbr\u003e6x6 hoop - 4 3\/16 x 5 7\/8 inches with 2,423 stitches\u003cbr\u003e5x7 hoop - 5 x 7 1\/16 inches with 2,863 stitches\u003cbr\u003e8x8 hoop - 5 1\/2 x 7 13\/16 inches with 3,137 stitches\u003cbr\u003e6x10 hoop - 6 5\/16 x 8 15\/16 inches with 3,533 stitches\u003cbr\u003e8x12 hoop - 7 11\/16 x 10 15\/16 inches with 4,249 stitches\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, SEW, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr data-mce-fragment=\"1\"\u003eHat (60mm x 130mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e4x4 (100mm x 100mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e5x7 (130mm x 180mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e6x10 (160mm x 260mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e8x8 (200mm x 200mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e7x12 (180mm x 300mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e8x12 (200mm x 300mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e10.5x16 (272mmx460mm)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAPPLIQUÉ INSTRUCTIONS:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526059622616,"sku":"10660","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYSplitZZ.jpg?v=1678117757"},{"product_id":"oh-state-pumpkin-applique-design-zigzag-edge-stitch-four-sizes-4x4-5x7-6x10-8x12-hoop","title":"Ohio State Pumpkin Applique Design Zigzag Edge Stitch Four Sizes 4x4, 5x7, 6x10, 8x12 Hoop","description":"\u003cp\u003eWhat a cute Ohio zigzag pumpkin applique embroidery design!\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes to fit:\u003cbr\u003e4x4 hoop - 3 1\/2 x 3 15\/16 inches with 2,048 stitches\u003cbr\u003e5x7 hoop - 5 1\/16 x 4 5\/8 inches with 2,639 stitches\u003cbr\u003e6x10 hoop - 6 1\/4 x 5 11\/16 inches with 3,221 stitches\u003cbr\u003e8x8 or 8x12 hoop - 7 7\/8 x 7 1\/8 inches with 4,011 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u20284x4 (100mm x 100mm)\u20285x7 (130mm x 180mm)\u20286x10 (160mm x 260mm)\u20288x8 (200mm x 200mm)\u20287x12 (180mm x 300mm)\u20288x12 (200mm x 300mm)\u20289.5x14 (240mm x 360mm)\u202810.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526060376280,"sku":"10991","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/OhioPumpkin.jpg?v=1677519244"},{"product_id":"tennessee-pumpkin-zigzag-applique-machine-embroidery-design-four-sizes-5x7-8x8-6x10-8x12-hoop-tn","title":"Tennessee Pumpkin Zigzag Applique Machine Embroidery Design Four Sizes 5x7, 8x8, 6x10, 8x12 Hoop TN","description":"\u003cp\u003eTennessee, who's ready for FALL? Show your love of cooler temps and beautiful autumn colors with this cute zigzag applique pumpkin embroidery design!\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes to fit:\u003c\/p\u003e\n\u003cp\u003e5x7 hoop - 2 9\/16 x 7 1\/16 inches with 1,868 stitches\u003c\/p\u003e\n\u003cp\u003e8x8 hoop - 2 7\/8 x 7 13\/16 inches with 2,057 stitches\u003c\/p\u003e\n\u003cp\u003e6x10 hoop - 3 11\/16 x 10 1\/4 inches with 2,671 stitches\u003c\/p\u003e\n\u003cp\u003e8x12 hoop - 4 1\/4 x 11 11\/16 inches with 3,117 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u20284x4 (100mm x 100mm)\u20285x7 (130mm x 180mm)\u20286x10 (160mm x 260mm)\u20288x8 (200mm x 200mm)\u20287x12 (180mm x 300mm)\u20288x12 (200mm x 300mm)\u20289.5x14 (240mm x 360mm)\u202810.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526060441816,"sku":"11249","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/TennesseePumpkinZZApp.jpg?v=1677687970"},{"product_id":"al-alabama-football-applique-embroidery-zigzag-stitch-four-sizes-5x7-8x8-6x10-and-8x12-hoop","title":"AL Alabama Football Applique Embroidery Zigzag Stitch Four Sizes 5x7, 8x8, 6x10, and 8x12 Hoop","description":"\u003cp\u003eCute, unique Alabama AL applique embroidery design with a football through the letters. Quick-stitching zigzag edge.\u003c\/p\u003e\n\u003cp\u003eThis listing comes with four sizes to fit:\u003cbr\u003e\u003cbr\u003e5x7 hoop - 5 x 7 1\/16, 4,402 Stitches\u003cbr\u003e8x8 hoop - 6 1\/4 x 8 13\/16, 5,426 Stitches\u003cbr\u003e6x10 hoop - 5 9\/16 x 7 13\/16, 4,833 Stitches\u003cbr\u003e8x12 hoop - 7 3\/4 x 10 15\/16, 6,728 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003cbr\u003e \u003cbr\u003e Available in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003cbr\u003e \u003cbr\u003e This design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u003c\/p\u003e\n\u003cp\u003e\u2028This is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003cbr\u003e \u003cbr\u003e Where hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u2028\u003cbr\u003e 5x7 (130mm x 180mm)\u2028\u003cbr\u003e 6x10 (160mm x 260mm)\u2028\u003cbr\u003e 8x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e APPLIQUÉ INSTRUCTIONS:\u003cbr\u003e \u003cbr\u003e Fabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.  Do not apply heat n bond lite for raggy edge applique.\u003cbr\u003e \u003cbr\u003e Appliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003cbr\u003e \u003cbr\u003e Step 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003cbr\u003e \u003cbr\u003e Step 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.  For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using.  Flannel frays very easily and adds more dimension to the raggy edge.\u003cbr\u003e \u003cbr\u003e Step 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches.  Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003cbr\u003e \u003cbr\u003e For designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003cbr\u003e \u003cbr\u003e Happy Stitching!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526060605656,"sku":"10014","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/il_fullxfull.4251503792_af8i_f2525fc3-4eed-46cd-a151-0d441e7d9392.jpg?v=1669371158"},{"product_id":"applique-nc-double-line-stitch-raggy-embroidery-design-north-carolina","title":"NC Double Line Applique Stitch Raggy Embroidery Design North Carolina","description":"\u003cp\u003eShow your North Carolina state spirit with this really cute raggy applique embroidery design!!\u003c\/p\u003e\n\u003cp\u003eThis listing includes one size to fit:\u003cbr\u003e8x12 hoop - 7 7\/16 x 10 1\/2 inches with 6,287 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copywrite laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u2028\u003cbr\u003e 5x7 (130mm x 180mm)\u2028\u003cbr\u003e 6x10 (160mm x 260mm)\u003cbr\u003e \u20288x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526065062104,"sku":"10941","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/NCDoubleRaggy.jpg?v=1678116181"},{"product_id":"mi-michigan-arched-zigzag-applique-embroidery-design-three-sizes-8-10-and-12-inches-wide","title":"MI Michigan Arched Zigzag Applique Embroidery Design Three Sizes 8, 10, and 12 inches wide","description":"\u003cp\u003eWhere are the Michigan fans? You're going to love this arched Michigan zigzag applique embroidery design.\u003c\/p\u003e\n\u003cp\u003eThis listing includes three sizes to fit:\u003cbr\u003e8x8 hoop - 3 1\/8 x 7 7\/8 inches with 4,535 Stitches\u003cbr\u003e6x10 hoop - 4 1\/16 x 10 1\/4 inches with 5,778 Stitches\u003cbr\u003e8x12 hoop - 4 5\/8 x 11 13\/16 inches with 6,576 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.  Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.  For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using.  Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches.  Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526068535512,"sku":"10853","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/MichiganArched.jpg?v=1674244089"},{"product_id":"paw-print-applique-embroidery-split-design-satin-and-zigzag-edge-stitch-five-sizes-5x7-8x8-6x10-7x12-and-8x12-does-not-include-font","title":"Paw Print Applique Embroidery Split Design Satin and Zigzag Edge Stitch Five Sizes 5x7, 8x8, 6x10, 7x12, and 8x12 does NOT INCLUDE FONT","description":"\u003cp\u003eApplique split paw print embroidery design with two edge stitch options: satin or zigzag. The font shown for the word Kentucky is not included in this listing.  You may purchase the font called Melanie from Rivermill Embroidery. \u003c\/p\u003e\n\u003cp\u003ehttps:\/\/rivermillembroidery.com\/melanie-machine-embroidery-font-alphabet\/\u003c\/p\u003e\n\u003cp\u003eThis design includes five sizes to fit:\u003cbr\u003eSatin:\u003cbr\u003e5x7 Hoop - 5 1\/8 x 6 7\/16 inches with 8,029 Stitches\u003cbr\u003e8x8 Hoop - 6 3\/16 x 7 13\/16 inches with 9,634 Stitches\u003cbr\u003e6x10 Hoop - 6 5\/16 x 7 15\/16 inches with 9,797 Stitches\u003cbr\u003e7x12 Hoop - 7 1\/16 x 9 inches with 10,992 Stitches\u003cbr\u003e8x12 Hoop - 7 7\/8 x 10 inches with 12,163 Stitches\u003c\/p\u003e\n\u003cp\u003eSatin:\u003cbr\u003e5x7 Hoop - 5 1\/8 x 6 7\/16 inches with 2,030 Stitches\u003cbr\u003e8x8 Hoop - 6 3\/16 x 7 13\/16 inches with 2,428 Stitches\u003cbr\u003e6x10 Hoop - 6 5\/16 x 7 15\/16 inches with 2,467 Stitches\u003cbr\u003e7x12 Hoop - 7 1\/16 x 9 inches with 2,767 Stitches\u003cbr\u003e8x12 Hoop - 7 7\/8 x 10 inches with 3,045 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526069190872,"sku":"11195","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/PawPrintSplit.jpg?v=1678290552"},{"product_id":"indiana-pumpkin-zigzag-applique-machine-embroidery-design-8x12-hoop-in","title":"Indiana Pumpkin Zigzag Applique Machine Embroidery Design 8x12 Hoop IN","description":"\u003cp\u003eWho's ready for FALL? Show your love of cooler temps and beautiful autumn colors with this cute pumpkin design! It comes in one size with a zigzag finishing stitch.\u003c\/p\u003e\n\u003cp\u003eOverall size is to fit:\u003cbr\u003e8x12 hoop - 7 13\/16 x 5 13\/16 inches with 2,755 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526069387480,"sku":"10545","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/IndianaPumpkin.jpg?v=1677521254"},{"product_id":"kentucky-ky-boho-rainbow-applique-embroidery-zigzag-cute-two-sizes-6x10-will-also-fit-8x9-and-8x12-hoop","title":"Kentucky KY Boho Rainbow Applique Embroidery Zigzag Cute Two Sizes 6x10 (will also fit 8x9) and 8x12 Hoop","description":"\u003cp\u003eBoho rainbow zigzag applique embroidery design for Kentucky lovers!\u003c\/p\u003e\n\u003cp\u003eThis listing includes two sizes to fit:\u003cbr\u003e6x10 (or 8x9 hoop) - 6 x 8 3\/8 inches with 9,449 stitches\u003cbr\u003e8x12 hoop - 7 7\/8 x 11 inches with 12,213 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright\u003cspan\u003e \u003c\/span\u003elaws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43526069616856,"sku":"10613","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYRainbow.jpg?v=1678388465"},{"product_id":"double-layer-athletic-k-zigzag-edge-four-sizes-4x4-5x7-6x10-8x8-hoop","title":"Double Layer Athletic K ZigZag Edge Four Sizes 4x4, 5x7, 6x10, 8x8 Hoop","description":"\u003cp\u003eThis two layer applique K design will be perfect for showing your team spirit! It has a quick-stitching zigzag edge.\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes:\u003cbr\u003e 4x4 - 3 ⅞ x 3 ⅞, 2838 stitches\u003cbr\u003e 5x7 - 5 ⅛ x 5 ⅛, 3688 stitches\u003cbr\u003e 6x10 - 6 ¼ x 6 ¼, 4448 stitches\u003cbr\u003e 8x8 - 7 13\/16 x 7 13\/16, 5509 stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43529382330584,"sku":"10312","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KDoubleLayer.jpg?v=1671641044"},{"product_id":"georgia-arched-applique-embroidery-satin-stitch-design-ga-four-sizes-5x7-8x8-6x10-8x12-hoop","title":"Georgia Arched Applique Embroidery Satin Stitch Design GA Four Sizes 5x7, 8x8, 6x10, 8x12 Hoop","description":"\u003cp\u003eShow your Georgia state spirit with this collegiate applique embroidery design!! You can omit the fabric for a completely different look!\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes to fit:\u003cbr\u003e5x7 hoop - 5 1\/16 x 7 1\/16 inches with 18,574 Stitches\u003cbr\u003e8x8 hoop - 5 1\/4 x 7 7\/8 inches with 19,795 Stitches\u003cbr\u003e6x10 hoop - 6 1\/4 x 10 3\/16 inches with 23,564 Stitches\u003cbr\u003e8x12 hoop - 7 7\/8 x 11 3\/4 inches with 29,266 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u20284x4 (100mm x 100mm)\u20285x7 (130mm x 180mm)\u20286x10 (160mm x 260mm)\u20288x8 (200mm x 200mm)\u20287x12 (180mm x 300mm)\u20288x12 (200mm x 300mm)\u20289.5x14 (240mm x 360mm)\u202810.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43529383084248,"sku":"10403","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/files\/GeorgiaArchedSatin_22155c30-f4cf-4ec7-ba9f-e16b7b8d6ee5.jpg?v=1761749398"},{"product_id":"tennessee-arched-applique-embroidery-zigzag-stitch-three-sizes-8x8-6x10-and-8x12-hoop","title":"Tennessee Arched Applique Embroidery Zigzag Stitch Three Sizes 8x8, 6x10, and 8x12 Hoop","description":"\u003cp\u003eCute, unique Tennessee arched applique embroidery design with a zigzag stitch edge.\u003c\/p\u003e\n\u003cp\u003eThis listing comes with three sizes to fit:\u003cbr\u003e8x8 hoop - 3 1\/16 x 7 13\/16 inches with 5,317 Stitches\u003cbr\u003e6x10 hoop - 3 15\/16 x 10 3\/16 inches with 6,742 Stitches\u003cbr\u003e8x12 hoop - 4 9\/16 x 11 13\/16 inches with 7,715 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u20284x4 (100mm x 100mm)\u20285x7 (130mm x 180mm)\u20286x10 (160mm x 260mm)\u20288x8 (200mm x 200mm)\u20287x12 (180mm x 300mm)\u20288x12 (200mm x 300mm)\u20289.5x14 (240mm x 360mm)\u202810.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric (with heat n bond lite on the back) over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43529383248088,"sku":"11244","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/il_fullxfull.4336439343_q3e5.jpg?v=1669369929"},{"product_id":"ky-applique-embroidery-kentucky-zigzag-stitch-four-sizes-for-5x7-8x8-6x10-and-8x12-hoop","title":"KY Applique Embroidery Kentucky Zigzag Stitch Four Sizes for 5x7, 8x8, 6x10, and 8x12 Hoop","description":"\u003cp\u003eShow your Kentucky state spirit with this cute KY block font zigzag applique embroidery design!!\u003c\/p\u003e\n\u003cp\u003eThis listing includes three sizes to fit:\u003cbr\u003e5x7 hoop - 5 1\/8 x 6 9\/16 inches with 3,508 Stitches\u003cbr\u003e8x8 hoop - 6 1\/8 x 7 13\/16 inches with 4,181 Stitches\u003cbr\u003e6x10 hoop - 6 1\/4 x 8 inches with 4,270 Stitches\u003cbr\u003e8x12 hoop - 7 5\/8 x 9 3\/4 inches with 5,179 Stitches\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copywrite laws.\u003c\/p\u003e\n\u003cp\u003e\u2028\u2028This is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u2028\u003cbr\u003e 5x7 (130mm x 180mm)\u2028\u003cbr\u003e 6x10 (160mm x 260mm)\u2028\u003cbr\u003e 8x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43529384755416,"sku":"10654","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYModernHoratio.jpg?v=1675867290"},{"product_id":"applique-embroidery-cats-kentucky-two-layer-design-machine-embroidery-two-color-zigzag-edge-five-sizes-4x4-5x7-8x8-6x10-8x12-hoop","title":"CATS Kentucky Applique Embroidery Layer Design Machine Embroidery Two Color ZigZag Edge FIVE Sizes 4x4, 5x7, 8x8, 6x10, 8x12 Hoop","description":"\u003cp\u003eShow your CATS spirit with this two layer zigzag applique embroidery design.\u003c\/p\u003e\n\u003cp\u003eThis listing includes five sizes that will fit:\u003cbr\u003e4x4 hoop - 2 7\/16 x 3 15\/16, 2,646 Stitches\u003cbr\u003e5x7 hoop - 4 5\/16 x 7 1\/16, 4,462 Stitches\u003cbr\u003e8x8 hoop - 4 13\/16 x 7 7\/8, 4,903 Stitches\u003cbr\u003e6x10 hoop - 6 3\/16 x 10 3\/16, 6,253 Stitches\u003cbr\u003e8x12 hoop - 7 1\/8 x 11 3\/4, 7,155 Stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003cbr\u003e \u003cbr\u003e Available in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003cbr\u003e \u003cbr\u003e This design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003cbr\u003e \u003cbr\u003e Where hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003e Hat (60mm x 130mm)\u2028\u003cbr\u003e 4x4 (100mm x 100mm)\u2028\u003cbr\u003e 5x7 (130mm x 180mm)\u2028\u003cbr\u003e 6x10 (160mm x 260mm)\u2028\u003cbr\u003e 8x8 (200mm x 200mm)\u2028\u003cbr\u003e 7x12 (180mm x 300mm)\u2028\u003cbr\u003e 8x12 (200mm x 300mm)\u2028\u003cbr\u003e 9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e 10.5x16 (272mmx460mm)\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e APPLIQUÉ INSTRUCTIONS:\u003cbr\u003e \u003cbr\u003e Fabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project.  Do not apply heat n bond lite for raggy edge applique.\u003cbr\u003e \u003cbr\u003e Appliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003cbr\u003e \u003cbr\u003e Step 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003cbr\u003e \u003cbr\u003e Step 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place.  For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using.  Flannel frays very easily and adds more dimension to the raggy edge.\u003cbr\u003e \u003cbr\u003e Step 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches.  Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003cbr\u003e \u003cbr\u003e For designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003cbr\u003e \u003cbr\u003e Happy Stitching!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43529385148632,"sku":"10183","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/CATSTwoLayerTwrall.jpg?v=1670352804"},{"product_id":"applique-embroidery-k-in-zigzag-edge-uk-university-of-kentucky-state-ky-4x4-5x7-6x10-7x7-8x8-hoop","title":"K Varsity Applique Zigzag Stitch Embroidery Design Kentucky KY Five Sizes 4in, 5in, 6in, 7in, 8in Hoop","description":"Show your Kentucky spirit with this applique K in a varsity font with a zigzag edge stitch!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis listing includes five sizes to fit:\u003cbr data-mce-fragment=\"1\"\u003e4x4 hoop - 3 5\/16 x 3 1\/2 inches with 1,719 Stitches\u003cbr data-mce-fragment=\"1\"\u003e5x7 hoop - 5 1\/8 x 4 9\/16 inches with 2,167 Stitches\u003cbr data-mce-fragment=\"1\"\u003e6x10 hoop - 6 5\/16 x 5 5\/8 inches with 2,643 Stitches\u003cbr data-mce-fragment=\"1\"\u003e7x7 hoop - 6 7\/8 x 6 1\/8 inches with 2,905 Stitches\u003cbr data-mce-fragment=\"1\"\u003e8x8 hoop - 7 13\/16 x 7 inches with 3,285 Stitches\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr data-mce-fragment=\"1\"\u003eHat (60mm x 130mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e4x4 (100mm x 100mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e5x7 (130mm x 180mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e6x10 (160mm x 260mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e8x8 (200mm x 200mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e7x12 (180mm x 300mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e8x12 (200mm x 300mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr data-mce-fragment=\"1\"\u003e10.5x16 (272mmx460mm)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAPPLIQUÉ INSTRUCTIONS:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eHappy Stitching!","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43529387114712,"sku":"11332","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KAcademicZigzag.jpg?v=1672692198"},{"product_id":"tenn-tennessee-applique-embroidery-diamond-stitch-four-sizes-5x7-8x8-6x10-and-8x12-hoop","title":"TENN Tennessee Applique Embroidery Diamond Stitch Four Sizes 5x7, 8x8, 6x10, and 8x12 Hoop","description":"\u003cp\u003eCute, unique Tennessee TENN applique embroidery design with a diamond stitch edge.\u003c\/p\u003e\n\u003cp\u003eThis listing comes with four sizes to fit:\u003cbr\u003e5x7 hoop - 3 7\/8 x 7 1\/16 inches with 4,461 Stitches\u003cbr\u003e8x8 hoop - 4 1\/4 x 7 13\/16 inches with 4,759 Stitches\u003cbr\u003e6x10 hoop - 5 9\/16 x 10 1\/4 inches with 5,930 Stitches\u003cbr\u003e8x12 hoop - 6 3\/8 x 11 11\/16 inches with 6,818 Stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43529387147480,"sku":"11240","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/TENNDiamond.jpg?v=1674920436"},{"product_id":"applique-embroidery-ky-raggy-and-zigzag-stitch-kentucky-4-sizes-5x7-6x10-8x8-8x12-8-designs","title":"KY Applique Embroidery Raggy and ZigZag Stitch Kentucky 4 Sizes 5x7, 6x10, 8x8, 8x12 8 Designs","description":"\u003cp\u003eShow your Kentucky spirit with this applique embroidery design!! This design comes with two edge stitches--raggy or zigzag!\u003c\/p\u003e\n\u003cp\u003eThis listing includes four sizes with two edge stitch options in each size for a total of 8 designs. The sizes will fit:\u003cbr\u003eRaggy:\u003cbr\u003e5x7 hoop - 7 7\/16 x 8 5\/8 inches with 3,760 Stitches\u003cbr\u003e8x8 hoop - 6 11\/16 x 7 13\/16 inches with 3,761 Stitches\u003cbr\u003e6x10 hoop - 6 3\/16 x 7 3\/16 inches with 3,506 Stitches\u003cbr\u003e8x12 hoop - 7 7\/16 x 8 5\/8 inches with 4,052 Stitches\u003cbr\u003e\u003cbr\u003eZigZag:\u003cbr\u003e5x7 hoop - 7 9\/16 x 8 3\/4 inches with 4,389 Stitches\u003cbr\u003e8x8 hoop - 6 13\/16 x 7 7\/8 inches with 4,004 Stitches\u003cbr\u003e6x10 hoop - 6 5\/16 x 7 5\/16 inches with 3,726 Stitches\u003cbr\u003e8x12 hoop - 7 9\/16 x 8 3\/4 inches with 4,389 Stitches\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is not a patch.  No physical product will be sent to you.  This is an embroidery file and you must have an embroidery machine to use this product.\u003c\/p\u003e\n\u003cp\u003eAvailable in PES, DST, EXP, HUS, JEF, VP3, and XXX.\u003c\/p\u003e\n\u003cp\u003eThis design may be used to decorate items for personal use or for sale, however the actual design may not be copied, sold, reproduced, or shared in any way. That is a violation of copyright laws.\u2028\u003c\/p\u003e\n\u003cp\u003eThis is a digital file available for immediate download. I cannot offer refunds on digital designs. If there is an issue with the stitched design, please let me know and I will do my best to correct your issue.\u003c\/p\u003e\n\u003cp\u003eWhere hoop sizes are mentioned, I am referring to the following hoop sizes:\u003cbr\u003eHat (60mm x 130mm)\u2028\u003cbr\u003e4x4 (100mm x 100mm)\u2028\u003cbr\u003e5x7 (130mm x 180mm)\u2028\u003cbr\u003e6x10 (160mm x 260mm)\u2028\u003cbr\u003e8x8 (200mm x 200mm)\u2028\u003cbr\u003e7x12 (180mm x 300mm)\u2028\u003cbr\u003e8x12 (200mm x 300mm)\u2028\u003cbr\u003e9.5x14 (240mm x 360mm)\u2028\u003cbr\u003e10.5x16 (272mmx460mm)\u003c\/p\u003e\n\u003cp\u003eAPPLIQUÉ INSTRUCTIONS:\u003c\/p\u003e\n\u003cp\u003eFabric Prep: Appliqué fabric should be washed and dried prior to using so that it’s preshrunk. Also, I recommend applying heat n bond lite to the back of the fabric, then peel off the paper backing before placing the material on your embroidery project. Do not apply heat n bond lite for raggy edge applique.\u003c\/p\u003e\n\u003cp\u003eAppliqué files have three steps and you need to keep the thread colors different for these three steps so your machine will stop (single needle machine). Even if you don’t change the thread on the machine, the different colored thread in the design will force the machine to stop.\u003c\/p\u003e\n\u003cp\u003eStep 1 Placement: Place your hooped project on the machine and run the first color. This is the placement stitch to show where to lay the fabric.\u003c\/p\u003e\n\u003cp\u003eStep 2 Tackdown: Lay your fabric over the placement stitch and run the second stitch. This is the tackdown stitch to hold the fabric in place. For raggy edge applique, I recommend adding a piece of flannel in addition to the fabric you are using. Flannel frays very easily and adds more dimension to the raggy edge.\u003c\/p\u003e\n\u003cp\u003eStep 3 Finishing Stitch: Remove the hoop from the machine, but DO NOT unhoop your project. Trim the appliqué fabric as close to the stitches as possible without cutting into the stitches. For raggy edge applique, trim the fabric leaving approximately 1\/4 inch of fabric past the stitches. Place the hoop back on the machine and run the third and final step which is the edge stitch or finishing stitch.\u003c\/p\u003e\n\u003cp\u003eFor designs with two different fabrics, the order is usually bottom layer placement stitch, bottom layer tackdown stitch, top layer placement stitch, top layer tackdown stitch, bottom layer edge stitch, top layer edge stitch. Trim fabric after each tackdown stitch before proceeding to the edge stitch.\u003c\/p\u003e\n\u003cp\u003eHappy Stitching!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Justsewembroidery","offers":[{"title":"Default Title","offer_id":43529387180248,"sku":"10655","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2809\/2376\/products\/KYPopcornRaggy.jpg?v=1674154950"}],"url":"https:\/\/justsewembroidery.com\/collections\/all-states.oembed?page=14","provider":"Justsewembroidery","version":"1.0","type":"link"}